Call us at 1-888-826-6342
Miniature Bolt-On RTD Temperature Sensor
Washer MB Sensor, 3 Wire, 120 in Lead
This items is no longer available please see the RTD-831-Series.
- Small, rugged, fast response
- Rough handling and harsh environments
- Easily removable and can be reused
- Wide variety of bolt options to cover most applications
MB-T-PF-MG-3-120 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Process Temperature Range
Nominal Resistance
Accuracy
Number Of Wires
Cable Insulation
Cable Length
Case Style
Category
Sensor Application
Termination Connection Type
- Temperature Range -70 to 550°C (-94 to 1022°F)
- Time Constant < 10 second in moving water
- Vibration Resistance Withstand 10 to 2000 Hz at 20 G's
Omega's miniature bolt-on RTD sensors offer a variety of bolt-on options. The space saving sizes allow for easy installation especially in tight or hard to reach locations. The bolt-on feature allows these sensors to be removed easily and reused where needed.
The Platinum RTD and Nickel RTD elements offer accurate and reproducible results. There are many different length options available and they offer a wide temperature range of -70 °C to 550 °C.
The typical applications for these sensors are, but not limited to: process control measurements, test and verification of existing systems, retrofitting existing equipment, prototyping, final assembly, embedding into parts, and/or against process pipes.
| [Model] | Model Image | Dimensions | Temp. | Case | Lead wire |
|---|---|---|---|---|---|
MB-F-* |
| 0.50 x 1.00 x 0.188" (12.7 x 25.4 x 4.8 mm) w/ 0.161" (4.1 mm) diameter hole | -70 to 500°C(-94 to 932°F) | Stainless steel | AWG 22, Mica-glass insulated |
MB-T-* |
| 0.29 x 1.25 x 0.188" (7.4 x 31.8 x 4.8 mm) with 0.161" (4.1 mm) hole | -70 to 500°C(-94 to 932°F) | Stainless steel | AWG 22, Mica-glass insulated |
MB-C-* |
| 0.265" (6.7 mm) ID ring lug | -50 to 260°C(-58 to 500°F) | Nickel plated copper | 2 lead: AWG 24, 3 lead: AWG 26, PFA insulated |
MB-MF-* |
| 0.50 x 0.375 x 0.188" (12.7 x 9.5 x 4.8 mm) with 0.166" (4.2 mm) hole | -50 to 260°C(-58 to 500°F) | Stainless steel | 2 lead: AWG 24, 3 lead:AWG 26, PFA insulated |
MB-S1-* |
| 1/4- 20 x 3/8” long thread with 7/16” hex head | -50 to 260°C(-58 to 500°F) | Stainless steel | |
MB-S2-* | M6 x 1 thread, 10 mm long, with 10 mm hex |
