text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Cement-On Surface Thermocouples

Item# CO4-K-40

Cement-On Surface Thermocouples

Omega introduces its cement-on, ultra-fast response thermocouples for fast surface temperature measurement applications, CO4. This Style is made from 0.002" thermocouple alloy foil, a special process where the butt-welded thermocouple junction is 0.002" in thickness. CO4 is flat, extremely low inertia construction and is an ideal means of measuring the temperature of both flat and curved metals, and plastic and ceramic surfaces where the very fast response is desired.

Omega's cement-on CO4 thermocouples are fabricated from ANSI "Special Limits of Error" grade thermocouple materials in "K" calibrations and yield accurate temperature indication when used with standard thermocouple instrumentation. CO4&nbsphas the fastest response due to a 32-gauge&nbspthermocouple wire.

 
Cement-on “CO4” thermocouples are the easiest to install. The foil sensor is embedded between two paper-thin Kapton high-temperature polymer laminates, which both support and electrically insulate the foil section as well as provide a flat surface for cementing. The polymer/glass laminate, in general, determines the maximum temperature of the construction which is 260°C (500°F) continuous and up to 370°C (698°F) for short duration. The CO4 comes in a 1 m (40"), 2 m (80"), or 3 m (120") PTFE insulated 32-gauge thermocouple wire which is bonded to the foil and strain relieved by the laminate. An application instruction sheet accompanies each package.






tc_colorcodes">View the Thermocouple Accuracy and Color Code charts

CO4-K-40
  • Ultra-Fast Response Time < 10 milliseconds
  • Made from 0.002" Foil and 0.010" Diameter Thermocouple Wire
  • Very Low Thermal Inertia
  • Ideal for Surface Temperature Measurement
  • Lead Length Options for Style 4: 1 m (40"), 2 m (80"), or 3 m (120") Long. Additional Lengths are Available Upon Request
  • Made From ± 0.05 mm (0.002") Foil
Thermocouple Type
Type of Sensor
Process Connection
Junction Type
Insulation
Wire Gauge
Wire Length
Termination Connection Type
Additional Feature 2
Application of Sensor
See All Options
Quantity Price each
1-9 $100.00
10-24 $95.00
25-49 $93.00
50-99 $89.00
100-199 $87.00
200+ $85.00

In stock

Lead Time ( If not in Stock): 99 weeks

Product Specs

Omega introduces its cement-on, ultra-fast response thermocouples for fast surface temperature measurement applications, CO4. This Style is made from 0.002" thermocouple alloy foil, a special process where the butt-welded thermocouple junction is 0.002" in thickness. CO4 is flat, extremely low inertia construction and is an ideal means of measuring the temperature of both flat and curved metals, and plastic and ceramic surfaces where the very fast response is desired.

Omega's cement-on CO4 thermocouples are fabricated from ANSI "Special Limits of Error" grade thermocouple materials in "K" calibrations and yield accurate temperature indication when used with standard thermocouple instrumentation. CO4&nbsphas the fastest response due to a 32-gauge&nbspthermocouple wire.

 
Cement-on “CO4” thermocouples are the easiest to install. The foil sensor is embedded between two paper-thin Kapton high-temperature polymer laminates, which both support and electrically insulate the foil section as well as provide a flat surface for cementing. The polymer/glass laminate, in general, determines the maximum temperature of the construction which is 260°C (500°F) continuous and up to 370°C (698°F) for short duration. The CO4 comes in a 1 m (40"), 2 m (80"), or 3 m (120") PTFE insulated 32-gauge thermocouple wire which is bonded to the foil and strain relieved by the laminate. An application instruction sheet accompanies each package.






tc_colorcodes">View the Thermocouple Accuracy and Color Code charts

en-US
en
Save Configuration