With the CL540ZA you can check and calibrate all your thermocouple instruments. Connect via a miniature thermocouple connector on the top end of the source. Use your own thermocouple wire connectors or order one of the cable accessories for easy operation out of the box. Easy to operate even in the dark areas of the plant with the backlit display. Stop carrying around a millivolt source and thermocouple tables. The CL540ZA works with the thermocouples you use including Types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Easily set any value quickly to within 0.1° with the adjustable digital potentiometer “DIAL” plus store any three temperatures for instant recall with the selector switch. You can also calibrate from -13.000 to +80.000 mV. Connect directly to the thermocouple inputs of smart transmitters, PLCs, controllers and multichannel recorders and verify their outputs or displays.
SPECIFICATIONS Accuracy: ±(0.015% of Reading + 0.006 mV) Cold Junction Compensation: ±0.25°C (±0.45°F) Operating Temperature Range: -25 to 60°C (-10 to 140°F) Millivolt Range: -13.000 to 80.000 mV Relative Humidity Range: 10% ? RH ? 90% 0 to 35°C (32 to 95°F), non-condensing. 10% ? RH ? 70% 35 to 60°C (95 to 140°F), non-condensing Dimensions: 126 L x 69 W x 45 mm D (4.96 x 2.73 x 1.79") With Boot: 144 L x 78 W x 52 mm D (5.67 x 3.06 x 2.05") Weight: 238 g (8.4 oz) (including batteries) With Boot: 311.8 g (11 oz) (including batteries) Batteries: Four "AA" Alkaline 1.5V (included) Battery Life: 50 hours Low Battery: Low battery indication with nominal 1 hour of operation left Protection Against Misconnection: Over-voltage protection to 60 Vdc (rated for 30 seconds) Display: High contrast graphic liquid crystal display. LED backlighting for use in low lit areas Source Output Impedance: < 0.3 ? Source Current: > 20 mA (drives 80 mV into 10 ?) Noise: ?4 microvolts p-p for frequencies of 10 Hz or below