Call us at 1-888-826-6342
Bolt-On Thermistor Surface Sensors with Aluminum Flag Housing
Flag-Mount Surface Mount Thermistor Sensor
Please refer to replacement part number ON-931-44004-40
- Aluminum Housing Provides Rapid Heat Transfer Between the Sensor and Mounting Surface for Accurate Measurements. Housing Includes a Clearance Hole for a #4 Mounting Screw or Can be Cemented or Epoxied to Flat Surfaces.
- Available with resistances of 2252 Ohms, 3,000 Ohms, 5000 Ohms, 10,000 Ohms or 30,000 Ohms at 25°C
- Standard Accuracy is ±0.2°C from 0 to 70°C, Optional Accuracy of ±0.1°C from 0 to 70°C is Available.
- Maximum Temperature Range 100°C
- Available with 12" (305mm) long PFA Insulated Wires or 40" (1 meter) Long PFA Insulated and Jacketed Cables.
ON-930-44004 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Nominal Resistance
Category
Process Temperature Range
Sensor Application
Accuracy
Cable Insulation
Termination Connection Type
Cable Length
This surface sensor is designed for a variety of temperature measurement applications. It represents a low-cost, fast response sensor and lends itself to easy mounting on flat surfaces.
