Temperature/Humidity/Dew Point Meter w/Optional Data Logger
Handheld Temperature, Humidity, and Dew Point Meter
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Temperature measurement: Ambient Temp. Dew Point Temp. Wet Bulb Temp. (THDP-10),
- Heat index, WBGT temperature measurement (THDP-10-DL).
- Hold function: Freeze current readings on LCD.
- High/Low Temp. & RH alarm threshold setting.
- Function: Maximum, Minimum, Average and Recall.
- Auto power off function: Save battery power when not used.
- Temperature unit: Selectable C or F.
- Low Battery Indicator.
- 99 Points Manual Recording (THDP-10).
- On line recording up to 64,000 points to PC (THDP-10-DL).
- Dimension: 160x60x40mm (Meter), Sensor tip (31mm)
- Power : AAA Volt battery x 3 pcs
- Two Year Warranty
- Calibration Certificate Included
THDP-10 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Storage
Communications Protocol
Features
Category
Input Type
Minimum Temperature Measurement
Maximum Temperature Measurement
Display Type
Accuracy Value
Supply Power
- Auto Power Off Yes
- Batteries Included Yes
- Battery Size AAA
- Battery Type Alkaline
- Data Hold Yes
- Display Type LCD
- Humidity Accuracy ±3%@25℃(10~90%),others ±5%
- Low Battery Indicator Yes
- Maximum Temperature Measurement 50C (122F)
- Measurement Units RH, {C}, {F}
- Meter Type Handheld
- Minimum Temperature Measurement -20C (-4F)
- Number of Display Digits 3
- Power Source Battery
- Temperature Accuracy ±0.6°C (2°F)]
The THDP-10 Series is a Handheld Digital Temperature, Humidity, Dew Point Meter with min/max, data storage, and data hold features. On Line Data Logging with DL Model
| Battery | Measurement | Features |
|---|---|---|
Up to 10 Hours | 2.6-10.5 ft | Visual and Audible Alarms |
When does the calibration certificate expire? How long is it valid for?
Hi Tetratek
Thank you for the inquiry. We suggest to use 1 year calibration cycle starting from the time you place the instrument in to service.
Best regards
OMEGA
Date published: 2021-08-06
How much does it cost to have this unit re-calibrated?
Hi Tom_B,
For price quote please email request to SALES@OMEGA.COM. Note in the email that the request is for a return for calibration.
Best regards
OMEGA
Date published: 2021-11-10
