Skip to search Skip to main content Skip to navigation

Call us at 1-888-826-6342

We noticed you are from . Visit your local site for regional offers and live support.

Self-Adhesive Polyimide Fast Response RTD Surface Sensors, Class A Accuracy

SA1-RTD Surface-Mount RTD Temperature sensor | Quick Shipment

$102.41

Item# SA1-RTD

Volume discounts available
Volume Discount Schedule
Quantity Price each
1-9 $102.41
10-24 $97.29
25-99 $92.17
100-499 $87.05
500-999 $81.93
1000+ $76.81

In stock

Lead Time (If not in stock): 6 weeks
SA1-RTD Surface-Mount RTD Temperature sensor | Quick Shipment SA1-RTD SA1-RTD
  • 100 Ω DIN Class A (±0.06 Ω or ±0.15°C at 0°C) Accuracy Standard
  • Easy-Installation Silicone-Based, Self-Adhesive Backing Rated to 260°C (500°F)
  • Back Can be Reapplied
  • Temperature Range -73C to 260°C Continuous, 290°C (554°F) Short Term Operation When Installed with OMEGABOND Air Set Cements

SA1-RTD Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination or click the CONFIGURE button to build your own.

Number Of Wires
Cable Insulation
Termination Connection Type
Cable Length
Category
Process Temperature Range
Sensor Application
Nominal Resistance
Accuracy
Mounting Style
Maximum Temperature Measurement
Minimum Temperature Measurement


The SA1-RTD surface-mount RTD temperature sensor mounts on flat or curved surfaces and provides Class A accuracy for critical temperature monitoring applications. Based on a 2 x 2 x 0.8 mm thin-film platinum RTD and supplied with bare 3-wire leads as a standard configuration (connector optional), itcan be customized for use in a wide variety of applications. The sensor can be easily applied with its selfadhesive

backing, or positioned permanently with OMEGABOND™ cements.
 
Use the SA1-RTD to monitor chip, heat sink, and environmental temperatures in electronic devices; check piping or ducting temperatures;monitor motor and transformer core heat; test insulation capabilities; and check other applications in which surface and/or gradient temperatures need to be monitored or controlled.

 

loading all models
loading all reviews
Rated 5 out of 5 by from BOM sensor I ordered temperature sensors to monitor solar panels temperature to analyze performance
Date published: 2016-10-23
Rated 4 out of 5 by from Works great Does exactly what it says it does. Installed easily with epoxy from omega. Plenty accurate for our purposes. Cost effective
Date published: 2017-02-28
Rated 5 out of 5 by from Great Purchase good quality product. customer service is always there to help
Date published: 2024-02-15
Rated 5 out of 5 by from RTD Sensor RTD's worked as we expected and were easy to order.
Date published: 2023-10-16
Rated 5 out of 5 by from Good customer service and quality product. Worked as expected, purchase was easy and customer service rep was very helpful and answered all my questions before order.
Date published: 2023-07-18
Rated 5 out of 5 by from Communication There were some issues with raw materials and was never communicated. I had to expedite the order to find out that the order has been delayed. However, Omega was very helpful to escalate the issue and sort out the raw material issue in good time.
Date published: 2023-05-26
Rated 5 out of 5 by from Order Thanks for the fast delivery! Nice quality,and best support!
Date published: 2023-05-26
Rated 5 out of 5 by from very accurate with the right controller,buy a cple these surface probes work very well, the adhesive sticks good
Date published: 2023-03-23
  • y_2024, m_3, d_28, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_SA1-RTD, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 2ms
  • REVIEWS, PRODUCT
loading all QA

For a DAQ device with EX0, RTD+, RTD-, and COM ports (such as NI 9217), which wire go to which port? (For both 3-wire and 4-wire RTDs)

Asked by: tackoo
Thank you for your inquiry. COM & RTD- should have 1 Black Wire Each. EX0 & RTD+ should have 1 Red Wire Each.
Answered by: CB Engineer
Date published: 2020-09-09

Is the self adhesive backing easy to remove after a month or so of use? We need to monitor temperatures on piping for a month or so, then the sensors will need to be removed. Working temperature while monitoring will be around 90 degrees c

Asked by: Mikecandu
Thank you for your inquiry. The entire assembly can be removed carefully, but the self-adhesive properties will be lost.
Answered by: Application Engineer JB
Date published: 2019-11-19

What are the color codes of the 3 wires?

Asked by: tackoo
Thank you for your inquiry. The color code is 1 Red Wire & 2 Black Wires.
Answered by: CB Engineer
Date published: 2023-10-31

Would the self-adhesive work on a concrete surface?

Asked by: gd65
Thank you for your inquiry. No, the adhesive will not work on a concrete surface.
Answered by: Application Engineer SP
Date published: 2023-07-14

What are the dimensions (width and thickess) of the cable?

Asked by: Dave Z
Thank you for your inquiry Dave Z. The wire gauge of this sensor is 26 AWG. It has a nominal size of 0.060" x 0.064".
Answered by: Application Engineer MC
Date published: 2022-08-25

Plan to use this RTD sensor with NI TB-4357 terminal block in a detachable way. Can a plug/connector can be soldered to the wires, then the instrument with the RTD sensor attached can be removed without remove the wires from the NI terminal block?

Asked by: kleung
The RTD's use regular conductors Nickel plated Copper so they can be soldered and quick attach connections used.
Answered by: ApplicationsEngineerANB
Date published: 2023-10-04

Is there an expected voltage output chart corresponding to this 4 WIRE-RTD, and wire description to wire the sensor correctly

Asked by: Bobby1
Hi Bobby1, Thank you for the inquiry. The sensor is a resistive element PT100 version. Voltage drop depends on the current applied by the instrument used. Resistance table vs temperature; https://www.omega.co.uk/temperature/Z/pdf/z252-254.pdf SA1-RTD uses standard lead wire color code. Best to refer to instrumentation used to determine proper wiring. For more details on RTD wiring; https://www.omega.co.uk/temperature/Z/ResistanceElements.html Best regards OMEGA
Answered by: NorwalkAE_RS
Date published: 2023-10-07

Does anybody have a recommendation for temperature sensing device to connect to this sensor? One that could connect to a computer, ideally.

Asked by: ap0720
You may want to consider the SA1-RTD-80 with the HH804U handheld meter along with the software HH800-SW (windows software and USB cable) which allows for real time data logging to a PC. For extensive data logging a DC power jack is available HH804U Meter $173.88 each in stock Comes complete with HH804-CONNECTOR (one per channel), protective rubber boot, NIST certificate (no points), 4 “AAA” batteries, and operator’s manual. https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/thermometers/p/HH804-805 HH800-SW $23.18 in stock Windows software and USB cable (USB models only) https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/thermometers/p/HH800-SW HH800-ADAPTOR $20.09 each in stock https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/hygrothermometers/p/HH800-ADAPTOR If a thermocouple can be considered in place of a RTD , for example the SA1-K-72- SRTC is a good option. We offer the Thermocouple Data logger with USB interface the OM-EL-USB-TC which accepts a J, K or T type thermocouple. This plugs directly into a USB Port – No USB cable is required https://www.omega.com/en-us/control-and-monitoring-devices/data-loggers/p/OM-EL-USB-TC-Series and the specifications sheet is: https://br.omega.com/omegaFiles/das/pdf/OM-EL-USB-TC.pdf Thank you for your question.
Answered by: Application Engineer
Date published: 2022-02-07
  • y_2024, m_3, d_28, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_SA1-RTD, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 40ms
  • QUESTIONS, PRODUCT
SA1-RTD Surface-Mount RTD Temperature sensor | Quick Shipment
$150.33
0 In Stock
SA1-RTD Surface-Mount RTD Temperature sensor | Quick Shipment
$155.35
3 In Stock
SA1-RTD Surface-Mount RTD Temperature sensor | Quick Shipment
$178.01
0 In Stock
en-US
en
Save Configuration