text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Heavy Duty Electropneumatic Converters I/P and E/P Models

Item# EP510-0120

Heavy Duty Electropneumatic Converters I/P and E/P Models Heavy Duty Electropneumatic Converters I/P and E/P Models
The IP510/EP510 Series are a patented family of electro-pneumatic instruments that are used to reduce a pneumatic supply pressure to a regulated output pressure which is directly proportional to a two-wire current or three-wire voltage input. This design incorporates closed loop sensing of the output pressure to achieve excellent accuracy and vibration stability. They also feature a unique damping circuit which can be adjusted to prevent overshoot and actuator hunting. Model selection includes General purpose NEMA 1, and Water-tight/Corrosion Resistant NEMA 4X (IP65). All models carry Hazardous Locations and intrinsically safe ratings.
EP510-0120
  • Hazardous Locations and Intrinsically Safe Ratings
  • NEMA 4X (IP65)
  • 0.1% Accuracy Typical
  • Closed Loop Pressure Feedback Control
  • Built-in Volume Booster Provides Flow Up to 12 SCFM
  • Easy Access to Zero and Span
  • Damping Pot Prevents Overshoot and Hunting
  • Low Air Consumption
  • Mount at Any Angle
  • Compact and Lightweight
  • Virtually No Sensitivity to Supply Pressure Changes
  • Removable Orifice for Easy Maintenance
  • Buna-N Seals Standard, Fluorocarbon Optional
Pressure Range
Pressure Port Type
Pressure Port Size
Input Signal
Output Range
Features
See All Options
Quantity Price each
1-9 $555.00
10-24 $527.25
25-49 $516.15
50-99 $493.95
100-199 $482.85
200+ $471.75

In stock

Lead Time ( If not in Stock): 6 weeks

Product Specs

  • Burst Rating For models with zero output capability maximum supply pressure = 40 psi (2.8 bar) above maximum output
  • Air Consumption 0.07 SCFM (2 LPM) maximum
  • Form Factor Mount at Any Angle
  • Maximum Ambient Temperature 93 {C} (200 {F})
  • Minimum Ambient Temperature -40 {C} (-40 {F})
  • Supply Pressure Effect 100 psig (6.9 bar) maximum
  • Sensitivity No effect

The IP510/EP510 Series are a patented family of electro-pneumatic instruments that are used to reduce a pneumatic supply pressure to a regulated output pressure which is directly proportional to a two-wire current or three-wire voltage input. This design incorporates closed loop sensing of the output pressure to achieve excellent accuracy and vibration stability. They also feature a unique damping circuit which can be adjusted to prevent overshoot and actuator hunting. Model selection includes General purpose NEMA 1, and Water-tight/Corrosion Resistant NEMA 4X (IP65). All models carry Hazardous Locations and intrinsically safe ratings.

  • CE Icon CE

en-US
en
Save Configuration