Start from Feb 2018, The DP26 series has been discontinued. Please contact our Sales Engineering department for details.
The DP26 differential temperature meter is a versatile dual input indicator/controller. The touch of a button toggles the display between T1, T2 and T1-T2. Analog output is optional, using any of the three values available. The optional control relays for alarms or on-off control can be tied to T1, T2 or T1-T2. The user selects J, K, T or J DIN thermocouple input from the front panel. The units of measure can be switched between °F and °C with the front panel pushbuttons. The optional analog output can function as retransmission of temperature (assignable to T1, T2, or T1-T2) or be assigned to Setpoint #1 and used as a proportional control output. Setpoint #1 will still continue to operate as a setpoint, while the analog output of either 4-20 mA or 0-10 V can be used to proportionally control an external process.
Panel Punches are available for this product here.
† All amounts shown in USD Note: Display and Output Options are not Field Installable. Ordering Example: (1) DP26-TC-GN-AR differential thermocouple indicator for J, K, T or J DIN inputs, with green display, analog output, dual 5 A relays and 115 Vac power, $345 + 80 + 70 = $495, $550.00
Part Number Builder
Build Your Part Number Below
Input Type select from: TC for Thermocouple input RTD for RTD input
Display Options select from: Nothing(leave field blank) for Standard display red -GN for Green display
Power Options select from: Nothing(leave field blank) for 115 Vdc -230 for 230 Vac -DC10/32 for 10 to 32 Vdc -DC26/56 for 26 to 56 Vdc
Output Options select from: Nothing(leave field blank) for None -A for Analog output -R for Dual 5 A relays -AR for Analog Relay -AI-R for Isolated analog output
Note: All combinations may not be valid, check spec sheet for valid part numbers.
DP26-RTD - Differential Temperature Meter with RTD
DP26-RTD - Differential Temp Meter - RTD FULL Manual