Integrated digital pressure gauge with display and control used to monitor hydraulic fluids. It monitors the pressure via the resistance measured on an isolation membrane. The output signal is amplified by a high-precision, low temperature drift amplifier. The signal is then fed into a high accuracy A/D converter for the microprocessor to process and then show on the LED display.
This flexible, simple to operate digital pressure gauge is safe, reliable, and easy to maintain. The DPG104 is widely used in hydro-power, water, petroleum, chemical, mechanical, hydraulic, and other industries.
Specifications Display Units: Gauge can be factory scaled to any engineering unit such as psi, kPa, bar, mbar, inHg, inH2O, mmHg, ftH2O, torr, kg/cm3 Measuring Range: -0.1 to 35 MPa (-14.50 to 5000 psi) Display Type: 4-digit LED Accuracy: 0.25% FS Power: 13 to 30 Vdc Stability: <0.1% FS per year Response Time: <30 ms Case Protection: IP40 Operating Temperature: -30 to 80ºC (-22 to 176ºF) Operating Humidity: <90% Media Temperature Limits: -40 to 150ºC (-40 to 302ºF) [equip with cooling element accessory if media temperature is greater than 80ºC (176ºF)] Overpressure Limits: 3x rated pressure below 60 psi; 2x rated pressure from 100 psi to 1000 psi; 1.5 x rated pressure over 1000 psi Process Connection: ¼” NPT, others consult Omega Wetted Parts: 316 SS threads, NBR O-ring Storage Temperature: -20 to 70ºC (-4 to 160ºF), less than 80% relative humidity
† All amounts shown in USD Ordering Example: (1) DPG104-100G DC powered digital pressure gauge, ¼” npt male pressure port, range: 100 psi Gage, $280.00