These cables include M8 and M12 connectors containing uncompensated connector sockets and thermocouple
extension grade cables in Type K and J calibrations. Colors include both ANSI and IEC color codes (see table below). These cables are sold with stripped leads
standard for easy connection directly to your measurement or control instrument. If you need a connector for attaching the cable to your instrumentation, Omega offers
the following thermocouple connectors which connect to a wide variety of hand held and other instruments:
Cable: #24AWG stranded thermocouple extension grade conductors with silicone rubber insulation and overjacket.
Connector: Nylon overmolded connectors with gold plated brass contacts and nickel plated brass connecting nut.
Temperature Limit: 180°C for the silicone extension cable and 90°C for the molded connector.
Color Codes: Available in both ANSI and IEC color codes (see table below).
Over Molded Connector Material
Type K IEC
Type J IEC
Type K ANSI
Type J ANSI
† All amounts shown in USD Note: When specifying a connector in place of stripped leads, add:
"-SMPW-CC-M" to the end of the model number for an SMPW-CC Male connector and add $5 to the price.
"-SMPW-CC-F" to the end of the model number for an SMPW-CC Female connector and add $5 to the price.
"-OSTW-CC-M" to the end of the model number for an OSTW-CC Male connector and add $5 to the price.
"-OSTW-CC-F" to the end of the model number for an OSTW-CC Female connector and add $5 to the price.
Ordering Example: (1) M12C-SIL-K-S-F-3 Type K Cable with Straight, Female M12 Connector One End, 3 Meters Long, $15.80 plus (1) M8C-SIL-J-S-F-3 Type J Cable with Straight, Female M8 Connector One End, 3 Meters Long, $14.30, $15.80 + 14.30 = $30.10
Part Number Builder
Build Your Part Number Below
Extensions Cable Type select from: M12C for M12 Extension cable M8C for M8 Extension cable
Thermocouple Type select from: J for Thermocouple Type J JI for Thermocouple Type JI K for Thermocouple Type K KI for Thermocouple Type KI
Cable Length select from: 1.5 for 1.5 m 3 for 3.0 m 5 for 5.0 m
Note: All combinations may not be valid, check spec sheet for valid part numbers.