Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Note: Minor discoloration of connector may occur between 150°C (302°F)
and 180°C (356°F). Electrical properties are not affected.
† All amounts shown in USD Note: OMEGA’s subminiature connectors are molded of high performance glass-filled nylon. Connectors will accommodate protection tubes from 0.25 mm to 3.17 mm (0.010" to 1/8") O.D. Additional bushings can be purchased for $0.25 each; order BB-SMP-1.
Order male and female separately to create pairs.
Ordering Example: (1) MTP-K-M 3-prong subminiture male conneactor, type K calibration, $3.27
Part Number Builder
Build Your Part Number Below
Thermocouple Calibrator select from: K for Type K T for Type T J for Type J E for Type E U for Uncompensated or Type B N for Type N
Connector Contacts select from: M for Male F for Female
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.