OMEGA OSTW thermocouple wire connectors are round pin standard size, 2 pole TC connectors designed to connect TC wire or temperature sensor instrumentation with a temperature controller or process control HMI automation panel. They are compatible with any other similarly sized Male, 2 prong thermocouple plug or 2 pin Female thermocouple jack . The female TC jack is Universal and will accept either the mini or standard size male TC plug.
Hollow pins of thermocouple compensating alloy are used. This TC connector is also available with a solid 2 pin design.
Thermocouple connector plug or jack with ANSI color code Type K Yellow, Type J Black, Type T Blue, Type E Purple, Type N Orange, Type R/S Green,Type C Red ,Thermocouple Connector Color Codes with compensating alloy per ANSI, ASTM and IEC are stocked.
This Ultimate Thermocouple Connector design OSTW-CC is ideal for fast and easy connection of TC cable or thermocouple wire via a TC cable clamp assembly. The cap/clamp contains the 4 captive screws and eliminates the loose screws typical with a traditional metal thermocouple cable clamp. Included are a metal back plate clamp, strain relief and grommets.
To greatly reduce assembly time use part #OST-CC-TOOL assembly tool holding fixture with the OSTW-CC connector and integral cable clamp to connect TC wire or cable. This is a fast and reliable method to terminate TC wire to connectors.
† All amounts shown in USD Note:Order male and female separately to create pairs.
To order Solid Pin Male Connectors: Add suffix “-S” to the model number and add $2 to price.
IEC color code connectors available. Add "I" to the calibration code letter example "-KI- or -JI-" for a male or female connector . Example K IEC male is "OSTW-CC-KI-M" (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) OSTW-CC-K-M Type K, Male, Glass Filled Nylon Standard Connector with Write On Window and Cable Clamp Cap, $6.75
Part Number Builder
Build Your Part Number Below
Calibration select from: J for Type J K for Type K T for Type T E for Type E C for Type C R/S for Type R/S U for Type U N for Type N
Connector Type select from: M for Male Only F for Female Only
Connector Type select from: Nothing(leave field blank) for None -S for Solid pin male connector
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.
Thermocouple Terminal Blocks and Sensor Terminal Blocks
Rated 5 out of
Ricky Rocket from
Good quality, good price, easy to wireThese standard T/C connectors are easy to use and are made to last. We use them on gas turbine T/C's
Date published: 2015-11-24
Rated 5 out of
great jackwe have used other k type connectors, but these are the best i have ever seen.
i love the way they lock on the cable, plus there are "gromets" to seal connector.
Date published: 2017-12-01
Rated 4 out of
works as it shouldproduct is completely packaged with all parts and instructions. Connects as it should and is compatible with other of the same specification.
Date published: 2017-06-26
Rated 5 out of
Perfect. Great qualityThe fit is perfect. Very solid design and each connection has a tight fit. The controller seems to be more accurate with using these versus twisting the wires together.