RTD Single Sensor This RTD plug sensor is ideal for pressure vessel applications, pressurized containers and applications requiring a temperature sensor with an NPT mounting fitting. The single element design has a 1/4" diameter, 304 stainless steel probe that extends 1/2" from a 1/4"NPT mounting thread (optional 1/8"NPT mounting thread also available). Leads are 6' long, stranded #26 AWG nickel plated copper, PFA-insulated & jacketed with steel overbraid. Sensors are supplied with or without subminiature connectors. Pressure rating is 2500 psi., and the maximum temperature rating is 230°C (445°F).
RTD Dual Element Sensor Dual RTD pipe plug probes come standard with flush sensing surfaces which minimize interference with moving parts, and 1/8"NPT mounting threads (optional 1/4"NPT mounting threads also available). The leads are 6' long, stranded #26AWG nickel plated copper, PFA insulated & jacketed cables with miniature connectors on each cable.
For complete product specifications see the Related Links section at the bottom of this page.
† All amounts shown in USD Ordering Example: (1) RTD-NPT-72-E RTD Pipe Plug Probe, 72 inch leads and, $74.00
Part Number Builder
Build Your Part Number Below
RTD Dual Element Sensor select from: Nothing(leave field blank) for None -DUAL for Dual 100 U Class A DIN Platinum thin-film elements
Thread Size select from: 1/4 for 1/4 NPT 1/8 for 1/8 NPT
Termination Options select from: -TA3F for Audio Connector -OTP for OTP Connector -MTP for MTP Connector Nothing(leave field blank) for Stripped Leads
Temperature Range select from: -HT for 480ºC max Nothing(leave field blank) for 230ºC max
Cable Options select from: Nothing(leave field blank) for None -S for Steel Overbraid for -DUAL only
Note: All combinations may not be valid, check spec sheet for valid part numbers.