Shear Gages - Full Bridge Shear

SGT-2DD and SGT-3 series

^$53.00 SGT-2DD/350-SY41

PLACE ORDER

SGT-2DD and SGT-3 series is rated 5.0 out of 5 by 2.

Precision Transducer Quality Gages
350 or 700 ohm Bridges
compensated for Steel or Aluminum
2 Half Bridge Pattern can be used a 1 Full Wheatstone Bridge

Strain Gages, Accessories and Instrumentation - View related products

Description

OMEGADYNE® offers full bridge transducer quality strain gages for shear and torsional strain applications. These strain gages can be used in transducer design for shear beam load cells, or they can also be used for reaction torque on a shaft.

SGT-2DD/350-SY** has 2 half bridges on one carrier piece. Each half bridge has a dual shear pattern, with opposite grids and a common lead/solder pad. SGT-3/700-FB** has 4 independent shear strain gages, with opposite grid angles, on one carrier, with separate leads/pads (electrically independent). Below we show one wiring example; SGT-2DD/350-SY** used to measure a reaction torque on a shaft. The strain gages have been numbered, and the leads/solder pads labeled.

Place Order(Specify Model Number)

Show Only Stocked Items

Part Number/ Desc.

Qty

RoHS

Description

MY OMEGA RoHS

The part number is RoHS Compliant.

The part number is NOT RoHS Compliant.

RoHS Compliancy of the part number is undetermined.

May be ordered as RoHS compliant, however, that requirement must be specified at the time of ordering by adding "-rohs" to the end of the part number.

Search the compliancy of specific part numbers or more details about RoHS compliancy.

SOLD IN PACKAGES OF 5 GAGES

2 Half bridges with common lead/solder pad

SGT-2DD/350-SY11

$59.00

17 In Stock

350 ohm Full bridge shear pattern, Ribbon leads, Compensated for Steel

SGT-2DD/350-SY13

$59.00

2 In Stock

350 ohm Full bridge shear pattern, Ribbon leads, Compensated for Aluminum

SGT-2DD/350-SY41

$53.00

Available In 6 Weeks

350 ohm Full bridge shear pattern, Solder pads, Compensated for Steel

SGT-2DD/350-SY43

$53.00

Available In 6 Weeks

350 ohm Full bridge shear pattern, Solder pads, Compensated for Aluminum

4 Gages on one carrier with seperate leads/solder pads

SGT-3/700-FB11

$116.00

Available In 6 Weeks

700 ohm Full bridge shear pattern, Ribbon leads, Compensated for Steel

SGT-3/700-FB13

$116.00

Available In 6 Weeks

700 ohm Full bridge shear pattern, Ribbon leads, Compensated for Aluminum

SGT-3/700-FB41

$108.00

Available In 6 Weeks

700 ohm Full bridge shear pattern, Solder Pads, Compensated for Steel

SGT-3/700-FB43

$108.00

Available In 6 Weeks

700 ohm Full bridge shear pattern, Solder Pads, Compensated for Aluminum

† All amounts shown in USD
Ordering Example: (1) SGT-2DD/350-SY11 Ribbon leads, compensated for steel, 350 ohms. package of 5 gages, $59.00

Rated 5 out of 5 by rtuckr from Accurate Strain Guages Easy to install and calibrate. I used on a Torque measurement with good success.

Date published: 2017-04-20

Rated 5 out of 5 by Erick4 from Worked how it should. Installed it and it worked as it should. No issues.

Date published: 2016-03-11

Keywords: Shear Gages - Full Bridge Shear custom strain gages transducer gages