SHX subminiature connectors are ideal for use with fine gage thermocouple wires in applications where high temperatures are required. The SHX connector is permanently dot-coded to conform to ANSI and OMEGA standards; for applications such as high vacuum furnaces where contamination would adversely affect the process, USHX connectors are shipped with a removable color-coding dot. Two-piece ceramic construction assures long life, while the oversized terminal screws allow for easy wiring.
† All amounts shown in USD Note: Type U uncompensated (Model SHX-U) connectors are used with Type B thermocouples (Pt/6%Rh-Pt/30%Rh)
Order male and female separately to create pairs.
Ordering Example: (1) SHX-K-M Ultra high temperature male connector, type K calibration, $6.05
Part Number Builder
Build Your Part Number Below
Connector Style select from: SHX for Glazed connector with color coded dot USHX for Unglazed connector with removable color dot
Thermocouple Calibration select from: K for Type K T for Type T J for Type J E for Type E R/S for Type R/S G for Type G C for Type C D for Type D U for Uncompensated or Type B N for Type N
Connector Contacts select from: M for Male F for Femaler
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.
It's the easiest way to sort through our selection of thermocouples to find the right product for your application
Rated 4 out of
Works as advertisedConnectors work as advertised although being ceramic they crack easily with rough handling.
Note: Strain relief clamps are also needed to facilitate holding the attached cable in place.
Date published: 2016-09-23
Rated 3 out of
Hight temp connectorI like the firm hold on the connectors but did not realize how fragile the cover assembly is. I broke the cover with only moderate tightening of the screws.
I was a little more cautious on the next assembly and it was ok.