The SV230 Series valves are designed for low-pressure steam applications in which the valve must operate when the pressure drop across the valve falls into the 0 to 5 psi range. These valves are able to control steam up to 45 psi at 143°C (290°F). All seals are made of ethylene propylene for compatibility with steam over a wide temperature range and for trouble-free, bubble-tight service.
The SV231 through SV235 are direct-lift valves, which combine the features of a direct-acting valve with those of a pilot operated valve. Because of a flexible link between the solenoid plunger and the diaphragm, the direct-lift valve functions as a direct-acting valve at low pressures and as a pilot-operated valve at high pressures. It is sometimes referred to as a zero delta pressure valve or a hung diaphragm valve.
SPECIFICATIONS Operation: Direct lift Wetted Parts: Brass, Stainless steel, copper, and seal Medium: Liquid or gases Max Static Pressure: 5 times max psid Ambient Temp: -9 to 50°C (15 to 122°F) Mounting: Pipe mounting, any direction Power: 22 W, 120 Vac, 50 to 60 Hz, Class H
† All amounts shown in USD Ordering Example: (1) SV232 2-way direct-lift steam valve, NC with a brass body and 5/8" orifice with EDPM seal, $240.00
General Purpose 2-Way Solenoid Valves - NEMA-4, Stainless Steel and Brass
Rated 5 out of
Great ValveI'm using it in a low pressure application 15 psi saturated steam.
works perfectly so far good flow rate 1/2" npt plumbing doesn't get any easier than that.
this valve is replacing an original that cost more than twice the price and IMHO it's doing a better job