Sanitary, Rangeable, Pressure Transmitters with Display
-15 to 100 psi, 1.5" Tri-Clamp
This item is available for quick shipping
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $824.92 |
| 5-9 | $783.67 |
| 10-24 | $767.18 |
| 25-49 | $734.18 |
| 50-99 | $717.68 |
| 100+ | $701.18 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Pressure Transducer for Sanitary or CIP (Clean-in-Place) Applications
- Meets 3-A sanitary standards for food, beverage, dairy, and pharmaceutical applications
- IP67 316 SS enclosure protects against harsh environments
- 5 digit display for easy monitoring
- +/- 0.2% URL accuracy for precise pressure measurements
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Temperature Unit
Pressure Temperature Min
Pressure Temperature Max
Pressure Range
Pressure Type
Accuracy Class
Accuracy Value (compensated range)
Output Signal
Electrical Output
Pressure Port Size
Pressure Port Type
Connection/Termination
Operating Temperature Range
Additional Features
Product Specs
- Accuracy ±0.2TD% SPAN
- Electrical Connection 4 pin male M12
- Output Signal 4-20mA Two wire
- Storage Temperature -40 to 85°C (-40 to 185°F)
- Ambient Temperature Effects (-20°C to 70°C) ±(0.1+0.1TD) % SPAN
- Damping Time Selectable, 0 to 100 S
- Environmental Rating IP67
- Housing Material 316 SS
- Isolating Diaphragm 316L SS
- Load Resistance <(U-10.5)/0.021
- Long Term Stability +/- 0.1% URL / year
- Media Temperature -40 to 120°C (-40 to 250°F)
- Media Fluids and gasses compatible with 316 SS and FKM
- Mounting Position Effects Apply to any position. Install error less than 0.06 psi can be corrected by PV=0 reset.
- Operating Temperature -10 to 110°C (14 to 230°F)
- Power Consumption 500mW(20.8mA output @ 24VDC)
- Power Supply Effects ± 0.005TD% SPAN/V (Zero and Span)
- Process Connection/Material Tri-Clamp
- Sensor Fill Fluid Dipropylene Glycol (Carrylate/Caprate)
- Sensor Response Time 200 mS
- Sensor Seal O-ring, FKM
- Supply Voltage 10.5 to 55VDC
- Transmission Distance < 1000m
- Vibration Effects GB/T 1827.3/IEC61298-3 tests,20g (5-2000HZ, max<±3mm) <0.1% URL
- Weight 1.14 lbs
Omega’s PX3005K02 is a compact, rangeable, digital sanitary pressure transmitter that is ideal for monitoring pressures in food and pharmaceutical industries where a flush diaphragm design is required. The rugged 316 stainless-steel enclosure is IP67 rated making it suitable for washdown environments. A 5-digit backlit LCD allows for full precision representation of process variable. This hygienic design has been issued 3-A symbol authorization and meets the requirements of the 3-A Sanitary Standards making it the best choice for process automation and tank level applications where consistent reliable pressure management are essential.
| Range Limits | |||||||||
| Nominal Value | Minimum Span | Upper (URL) | Lower (URL) | Over Range Limit | |||||
| kPa | PSI | kPa | PSI | kPa | PSI | kPa | PSI | kPa | PSI |
| 20 | 3 | 10 | 1.5 | 20 | 3 | -20 | -3 | 30 | 4.5 |
| 35 | 5 | 20 | 3 | 35 | 5 | -35 | -5 | 52.5 | 7.5 |
| 100 | 15 | 35 | 5 | 100 | 15 | VAC | VAC | 150 | 22 |
| 200 | 30 | 100 | 15 | 200 | 30 | VAC | VAC | 300 | 45 |
| 700 | 100 | 200 | 30 | 700 | 100 | VAC | VAC | 1050 | 150 |
| MPa | PSI | MPa | PSI | MPa | PSI | MPa | PSI | MPa | PSI |
| 1 | 150 | 0.5 | 75 | 1 | 150 | VAC | VAC | 1.5 | 220 |
| 1.7 | 250 | 1 | 150 | 1.7 | 250 | VAC | VAC | 2.55 | 370 |
| 3.5 | 500 | 1.7 | 250 | 3.5 | 500 | VAC | VAC | 5.25 | 750 |
Can the transducer be sent in for calibration?
Yes! This can be sent in for calibration to our Ohio Branch. I will need a part number, serial number, the type of calibration (compression/ tension/ system calibration), and your contact information and will then send you an estimate and a materials handling sheet to fill out. Feel free to send this information to cservice@omega.com and we will be happy to assist you with creating a return number. Thanks for your inquiry!
Date published: 2019-12-31
