3" and 5" Dial Bimetal Thermometer with NPT options
DialTemp™, Bi-Metal Stem Thermometers
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-4 | $137.58 |
5-9 | $130.70 |
10-24 | $127.95 |
25-49 | $122.45 |
50-99 | $119.69 |
100+ | $116.94 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Made Entirely of Stainless Steel
- Hermetically Sealed
- Model X and XR: 3 Inch O.D. Head
- Model V and VR: 5 Inch O.D. Head
- Model XR and VR Feature Reset Screw
X-250-600F-9-1/4 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Dial Diameter
Process Temperature Range
Dual Range
Connection Type
Resolution/Division
Stem Length
Series
Accuracy Value
Stem Dia
Thermometers of this design are well adapted to installation on top of tanks, boilers, in high locations or other areas where it would be difficult to read a standard angle-form instrument.
Stems are 1/4' in diameter. Stem lengths up to 36' can be supplied.
Normally supplied with the stem at the BOTTOM (6 o’clock) position, on special order, these thermometers can be set with the stem protruding at the LEFT (9 o’clock), TOP (12 o’clock) or RIGHT (3 o’clock) positions. If not specified, the standard BOTTOM (6 o’clock) position will be supplied.
X, XR, V and VR
Ranges and °Divisions
* Minimum Stem Length - 4'
**Range available in X and XR Models only
†Range available in V and VR Models only
Stems are 1/4' in diameter. Stem lengths up to 36' can be supplied.
Normally supplied with the stem at the BOTTOM (6 o’clock) position, on special order, these thermometers can be set with the stem protruding at the LEFT (9 o’clock), TOP (12 o’clock) or RIGHT (3 o’clock) positions. If not specified, the standard BOTTOM (6 o’clock) position will be supplied.
X, XR, V and VR
Ranges and °Divisions
|
|
|
**Range available in X and XR Models only
†Range available in V and VR Models only


