The UPJ series has been discontinued. Please see the SPJ as a possible alternative or contact our Temperature Engineering department.
Accepts both miniature and standard male 2 pin TC connectors. Two thermocouple connectors in one! For the large volume user who requires the ability to quickly remove installed connectors, the SIRT-1 removal tool is invaluable. Operating easily even in densely packed panels, the tool compresses all spring clips together, allowing the UPJ to be pushed out of the panel from the rear.
† All amounts shown in USD Note: OMEGALLOY™ is generically known as Nicrosil-Nisil †K, T, J, E, R, S and B are ANSI designations NOTE: Type U (Uncompensated) connectors are used with type B thermocouples, (Pt/6%Rh-Pt/30%Rh) Ordering Example: (1) UPJ-T-F Type T (Copper/Constantan), Universal Snap-In Panel Jack, $4.75
Part Number Builder
Build Your Part Number Below
Calibration Type select from: K for Type K Calibration T for Type T Calibration J for Type J Calibration E for Type E Calibration R/S for Type R/S Calibration U for Type U Calibration N for Type N Calibration
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.
Rated 5 out of
Universal connector is a great ideaMy work uses a mix of TCs, and these universal jacks are the right
solution for connecting the mix of full-size and minature connectors.
Date published: 2016-08-12
Rated 5 out of
AWESOME EXPERIENCEI WAS TOLD BY ANOTHER SUPPLIER NOT TO ADD CONNECTORS TO MY THERMOCOUPLERS. THE GUYS AT OMEGA NOT ONLY PROVIDED A GREAT PRODUCT, BUT GAVE ME ALL THE TECHNICAL SUPPORT NEED TO DO THE JOB. THE UNIT TURNED OUT GREAT AND FUNCTIONS PERFECTLY. I ALSO RECOMMENDED TO OTHER SUPPLIERS THAT THESE PRODUCTS MIGHT BE SOMETHING THEY SHOULD CONSIDER PROVIDING TO THEIR CUSTOMERS.