Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Carbon Monoxide Transmitter
NEMA 4X, 0 to 50 PPM Carbon Monoxide Transmitter
Please contact Technical Sales Team for assistance.
- 0 to 50 ppm Range
- Compact and Inexpensive
- Long Operating Life
- NEMA 4 (IP65) Enclosure
- Loop Powered and Reverse Voltage Protected
- Temperature Compensation
- Applications:
- CO from Air, Oxygen and Nitrogen Generators
- Gas Manufacturers–Filling Stations
- Heat Treating and Bright Annealing
- Medical Breathing Devices
TXCO-50 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Application
Resistance or Output Type
Accuracy
Electrical Connection Type
Additional Features
Description
The TXCO-50 Series of carbon monoxide transmitters is a simple, accurate and very economical way to measure CO in the 0 to 50 ppm levels. For special ranges please consult Omega.The TXCO-50 sensor uses a special electro chemical cell to measure the CO concentration. The sensor meets the industrial requirements for accuracy, sensitivity and ease of use.
The transmitter comes fully calibrated and requires no calibration for two years. After two years the TXCO-50 can be calibrated with a CO gas. Typical sensor life is up to 5000 ppm hrs.
Specifications
Measuring Range: 0 to 50 ppm CO
Special Ranges: Consult OMEGA
Calibration: Using a known CO calibration gas that is NIST traceable
Accuracy:
±2% FSD T = constant
±5% FSD 0>T>50°C (122°F)
Response Time: 90% FSD at 20°C (68°F) < 30 sec 90%
Operating Temperature: 0 to 50°C (32 to 122°F)
Warm Up Time: 2 minutes
Pressure: 0.1 to 1 bar
Signal Output: 4 to 20 mA/DC loop power
Voltage: 24 Vdc
Load: Type 470 Ω at 18 Vdc maximum 700 Ω
Housing: NEMA 4 (IP65)
Dimensions: 80 L x 75 W x 55 mm D (3.15 x 2.95 x 2.16")
Enclosure: Painted aluminum
Connection: ¼" tubing
Weight: 1.0 kg (2.2 lb)
