1/16, 1/8, and 1/4 DIN Autotune Temperature/Process Controllers
1/16, 1/8, and 1/4 DIN Temperature/Process Controllers with Fuzzy Logic
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $116.66 |
| 10-24 | $110.83 |
| 25-49 | $104.99 |
| 50-99 | $99.16 |
| 100-499 | $93.33 |
| 500+ | $87.50 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Dual Display
- Front Panel Programmability
- Single Control Output
- Fuzzy Logic
- Autotune
- Dual 4-Digit LED Display and Indicators for Output and Alarm Status
- Single Alarm Output
- Universal Power Supply
- Isolated Analog Control Output (Selected Models)
- 10 Segments of Ramp/Soak (Selected Models)
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Measurement Type
Control Outputs
Form Factor
Number of Inputs
Input Type
Supply Voltage Type
Ramp and Soak
Display Type
Additional Feature
Output Type
Product Specs
The CN4000 Series temperature/process controllers set a new standard for ease-of-use and value. Units feature dedicated input models with thermocouple and RTD inputs, and models with universal inputs for both temperature and process inputs. Standard features include autoune, fuzzy logic, fully adjustable PID or on/off single control output with one alarm. Selected thermocouple and RTD input models can show whole or tenth of degree display resolution. Output types include relay, dc pulse, or an isolated analog 0 to 20 mA output.
SPECIFICATIONS
Selectable Inputs: Thermocouple, RTD, DC voltage, DC current, resistance (dependent on model)
Display: Two 4-digit, 7 segment, LED (red PV, green SV)
Resolution: 1.0, 0.1 (dependent on model)
Sample Rate: 8 per second
Accuracy: ±0.3% FS (thermocouple and RTD dedicated models), ±0.2% FS (universal input models)
Supply Voltage: 100 to 240 Vac (-15%, +10%); 50 to 60Hz or Optional 24 Vdc
Power Consumption: 3 W (thermocouple and RTD dedicated models), 6 W (universal input models)
Operating Temperature: -10 to 60‹C (14 to140‹F)
Humidity: 0 to 90 RH%
Control Output Ratings:
Relay: SPDT, 30 Vdc/1A, 250 Vac/1A (1⁄8 and ¼ DIN models)
Relay: SPST, 30 Vdc/1A, 250 Vac/1A (1⁄16 DIN models)
Proportional Current (Isolated): 0 to 20 mA DC,
DC Pulse: 12 Vdc/30 mA
Alarm Output Ratings:
Relay: SPDT, 30 Vdc/1A, 250 Vac/1A
DC Pulse: 12 Vdc/30 mA
Rated 3 out of
5
by
Oysterelectrician from
Cn418v-r1-r2
I have been using these temperature controllers for about 5 or 6 years now with about 15 in operation at an oyster hatchery. They are quite good for the price, but only seem to last about 4 yrs and then they get unreliable. I still use them and have only had one go bad in the 2 yr. Warranty period. Omega quickly replaced this unit.
Date published: 2016-04-27
Rated 4 out of
5
by
pork soda from
difficult chinese derived instructions
chinese based product - difficult to understand programming instructions - made in china
Date published: 2018-03-04
Rated 5 out of
5
by
Freddie from
Easy installation, works well.
This is a great temp controller, easy to set up and use. Works as it should. Not much else to say. I installed this on my wood furnace to control the intake damper, both protecting from potential overheat situations, as well as maintaining a minimum flue temperature to prevent creosote build up. Works great! Program the correct settings and this temp controller has essentially automated my wood furnace to self regulate.
Date published: 2016-12-14
Rated 2 out of
5
by
Justo from
Great product
Second time purchasing the cn4000 series control module and it's been great.
Date published: 2017-07-20
Rated 5 out of
5
by
JP537 from
Quick and Easy setup
Set it up and was operating in a matter of minutes. Works great
Date published: 2017-05-11
I have a cn4316-r1-r2. In the settings I can select Output type (Opt) as ssR, will this unit actually work with a DC ssr or is setting redundant?
The model has two relay outputs which are what is physically in the Controller. The Opt parameter should be set for rELy only for the R1/R2 model and the SSR driver models would be DC1/DC2.
Date published: 2020-06-29
What is the maximum current that these are rated for at 120VAC?
Thanks for connecting with Omega.The relay output is rated at 1A to 250VAC. Please contact us with any further questions.
Date published: 2019-06-26
CE