Dual Voltage SCR DC Motor Speed Control For Up To 2 H.P. Motors
Please add to cart to keep it or exit the configuration
- Dual Voltage - 120/240 Vac
- Adjustable Horsepower Settings
- NEMA 4/12 or 4X (IP66) Enclosure
- Packaged Bridge Supply (Full Wave)
- 1% Speed Regulation
- Adjustable Minimum and Maximum Speeds
- Adjustable Acceleration
- Adjustable Current Limit to 10 A
- 50:1 Speed Range
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
OMDC-253G-200E used for speed control in Omega's wire processing.
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: ±10% rated line voltage
Input Frequency: 50/60 Hz
Dimensions: 97 W x 140 H x 89 mm D (3.8 x 5.5 x 3.5')
Weight: 284 g (10 oz)
NOTE: When using the -29 option (FWD-OFF-REV switch), care must be taken to stop the motor completely before switching direction. Damage to the drive can result from switching direction at speed.