Microstepping Motor Drives, Analog in/Step & direction control
Microstepping Motor Drives
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $297.23 |
| 10-24 | $282.37 |
| 25-49 | $276.42 |
| 50-99 | $264.53 |
| 100-199 | $258.59 |
| 200+ | $252.65 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- DC Bus Voltage 12 to 40 Vdc Motor Supply
- Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
- Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
- Enable Input to Turn Off Current to the Motor
- Screw Terminal Connectors
- MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
- Pulse Width Modulated Current Control
3540M Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Control Mode
Supply Voltage
Driver Current
Integral I/O
Features
The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.
The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.
The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.
Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.
Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives
Click here for more info on the ELC series PLC: ELC_PLC.html" onclick="return popupbig(this, 'notes')" target="_blank"> ELC-PLC Series
Click here for more info on the OCS XL series PLC: OCSXL_Series.html" onclick="return popupbig(this, 'notes')" target="_blank"> OCS XL Series
Power Supply (Required for Drive Operation): Recommended: ps_series.html" onclick="return popupbig(this, 'notes')" target="_blank"> OMPS150A24
The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.
The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.
Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.
Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives
Click here for more info on the ELC series PLC: ELC_PLC.html" onclick="return popupbig(this, 'notes')" target="_blank"> ELC-PLC Series
Click here for more info on the OCS XL series PLC: OCSXL_Series.html" onclick="return popupbig(this, 'notes')" target="_blank"> OCS XL Series
Power Supply (Required for Drive Operation): Recommended: ps_series.html" onclick="return popupbig(this, 'notes')" target="_blank"> OMPS150A24
