All Metal Hot Tap Option Paddlewheel Flow MeterRugged, Reliable All-metal Sensors
Please add to cart to keep it or exit the configuration
- Rugged 316 Stainless Steel Construction
- Flow Rates as Low as 0.3 fps
- Installs in a Variety of Pipe Sizes
- No Magnets in Process Fluid
- Hot-Tap Version Removable Without Shutdown
- Uses Standard Pipe Connections
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The FP-2540 and FP-3-1500 Series offer the added strength and corrosion resistance of stainless steel for applications requiring low velocity measurement. Unique internal circuitry eliminates the need for magnets in the process fluid, enabling lower flow measurement while maintaining the advantages of insertion-type sensor design. The sensor’s unique rotor/bearing design offers low flow measuring capability with increased reliability.
Output Signal: Open collector, sinking
Output Frequency: 15 Hz per fps
Operating Range: 0.3 to 20 fps
Pressure/Temperature: With standard
FKM O-rings: 250 psi @ 82°C (180°F)
Power Requirements: 5 to 24 Vdc
Pipe Size Range:
FP-2540: 1.5 to 24"
FP-3-1500-2X: 1.5 to 36"
Repeatability: ±0.5% of full range
Linearity: ±1% of full range
Sensor Fitting: 316 SS
Rotor Bearings: PEEK
Cable Type: Twisted pair with foil shield
Cable Length: 7.6 m (25'); 305 m (1000') max