General Purpose 2-Way Solenoid Valves - NEMA-4, Stainless Steel and Brass
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $253.88 |
| 5-9 | $241.19 |
| 10-24 | $236.11 |
| 25-49 | $225.95 |
| 50-99 | $220.88 |
| 100+ | $215.80 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
General Purpose 2-Way Solenoid Valves - NEMA-4, Stainless Steel and Brass is rated
out of
5 by
1.
- Rated up to 145°C (293°F) Steam
- Rugged NEMA 4 (IP65) Housing
- Mounts in Any Position
- Rated for Continuous Duty
- Ethylene Propylene (EPDM) Seals
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Category
Valve Start Position
Body Material
Valve Type
Wetted Materials
Process Connection Size
Flow Coefficient (Cv)
Max Operating Pressure
Max Process Temperature
Media Type
Features
Product Specs
TYPICAL APPLICATIONS:
Heating and Cooling, Commercial Dish Washing Equipment, Car Washing Equipment, Food Processing, Commercial Laundry Equipment, Bottle Washing, Sterilizing Equipment
The SV230 Series valves are designed for low-pressure steam applications in which the valve must operate when the pressure drop across the valve falls into the 0 to 5 psi range. These valves are able to control steam up to 45 psi at 143°C (290°F). All seals are made of ethylene propylene for compatibility with steam over a wide temperature range and for trouble-free, bubble-tight service.
The SV231 through SV235 are direct-lift valves, which combine the features of a direct-acting valve with those of a pilot operated valve. Because of a flexible link between the solenoid plunger and the diaphragm, the direct-lift valve functions as a direct-acting valve at low pressures and as a pilot-operated valve at high pressures. It is sometimes referred to as a zero delta pressure valve or a hung diaphragm valve.
SPECIFICATIONS
Operation: Direct lift
Wetted Parts: Brass, Stainless steel, copper, and seal
Medium: Liquid or gases
Max Static Pressure: 5 times max psid
Ambient Temp: -9 to 50°C (15 to 122°F)
Mounting: Pipe mounting, any direction
Power: 22 W, 120 Vac, 50 to 60 Hz, Class H
Rated 5 out of
5
by
bikebandit from
Great Valve
I'm using it in a low pressure application 15 psi saturated steam.
works perfectly so far good flow rate 1/2" npt plumbing doesn't get any easier than that.
this valve is replacing an original that cost more than twice the price and IMHO it's doing a better job
Date published: 2016-06-15
CE