Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Male/Female Thread Connection, Inline Tension Link Load Cell
50,000 lbf, ±0.1%, Linearity, 2 mV/V Output, Cable
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $1,239.00 |
| 5-9 | $1,177.05 |
| 10-24 | $1,152.27 |
| 25-49 | $1,102.71 |
| 50-99 | $1,077.93 |
| 100+ | $1,053.15 |
Please contact Technical Sales Team for assistance. Any remaining stock is available for purchase
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Male to Female Thread Connection
- All Stainless Steel Construction
- Accuracy of 0.15%
- Heavy-Duty Construction for High-Capacity Loads
LC704-50K Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Weight Capacity
Measurement Units
Force direction
Linearity
Electrical Output (nominal)
OD
Height
Connection Type
Cable Length
- Hysteresis ±0.10% FSO
- Input Resistance 350 Ω
- Linearity ±0.10% FSO
- Maximum Ambient Temperature 121 {C} (250 {F})
- Maximum Compensation Temperature 71 {C} (160 {F})
- Measurement Type Load
- Minimum Compensation Temperature 16 {C} (60 {F})
- Repeatability ±0.05% FSO
- Safe Overload 150% of Capacity
- Ultimate Overload 300% of Capacity
- Zero Balance ±1.0% FSO
OMEGA’s LC704/714 Series tension link load cells have a male to female thread connection; LC704 with a 1.8 m (6') cable, and LC714 with an integral connector. Both series are comprised of all stainless steel. Applications include cables on cranes, support rods in architectural designs, engine test beds, suspension bridges and industrial weighing.
Specifications
Output: 2 mV/V ±0.25 % FSO
Excitation: 10 Vdc (15V max)
Linearity: ±0.10% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.05% FSO
Zero Balance: ±1.0% FSO
Operating Temp Range: -34 to 121°C (-30 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.009% FSO/°C (±0.005%FSO/°F)
Span: ±0.009% FSO/°C (±0.005% FSO/°F)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ?
Construction: Stainless steel
Electrical:
LC704: 1.8 m (6') 4-conductor cable
LC714: DT02H-10-6P (or equiv.)
Protection Class: IP67
Mating Connector: PT06F10-6S, (sold separately)
Calibration: Calibrated in tension*
* ?100,000 lb calibrated in compression. For calibrations ?300,000 lb, add suffix “-FS” and consult Sales for price and delivery.
Specifications
Output: 2 mV/V ±0.25 % FSO
Excitation: 10 Vdc (15V max)
Linearity: ±0.10% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.05% FSO
Zero Balance: ±1.0% FSO
Operating Temp Range: -34 to 121°C (-30 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.009% FSO/°C (±0.005%FSO/°F)
Span: ±0.009% FSO/°C (±0.005% FSO/°F)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ?
Construction: Stainless steel
Electrical:
LC704: 1.8 m (6') 4-conductor cable
LC714: DT02H-10-6P (or equiv.)
Protection Class: IP67
Mating Connector: PT06F10-6S, (sold separately)
Calibration: Calibrated in tension*
* ?100,000 lb calibrated in compression. For calibrations ?300,000 lb, add suffix “-FS” and consult Sales for price and delivery.
We have a LC714-100K-5V load cell... this is a load cell with built in amplifier... the documentation for this sensor is non-existent or hard to find at the very least. Where can I find the pinout documentation? (Including excitation voltage). Thank you
@Bruno3910 You must have received a calibration cert with this load cell. The wiring / pinouts must be listed on the cal sheet. If you do not have it, please send an email to pressure@omega.com with the serial number ( serial number must be etched on the actual load cell) .
We will send you a copy of the cal sheet. Thank you.
Date published: 2020-04-03
Accessories
Accessories & Compatible Meters
