Call us at 1-888-826-6342
Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The Omega Link SP-016 Heat Flux Smart Probe provides an easy way to integrate your thermopile-based heat flux sensor to the Omega Link Ecosystem. The SP-016 performs the necessary calculations to provide the heat flux measurement in W/m2. The SP-016 accepts heat flux sensors through its M12 4-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. Omega offers an optional M12-S-M-FM connector to easily connect wire leads to your SP-016.
The SP-016 supports any single thermopile sensor input (mV/W/ m2) and temperature compensation input (thermocouple). Additionally, the SP-016-1 provides 2 open drain discrete inputs/outputs that may be used to detect external switch closures or control external alarms and control relays.
Easily configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.
Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.
Omega Link Smart Probes are integrated with an advanced suite of IIoT Smart Core features. These features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.
Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.
Refer to the User’s Documentation of your heat flux sensor for Sensitivity, Gain, and Offset values.Values are configurable on SYNC configuration software.
|J||-210℃ to 1200℃||±0.5 ℃|
|K||-160℃ to 1372℃||±0.5 ℃|
|T||-190℃ to 400℃||±0.5 ℃|
|E||-200℃ to 1000℃||±0.5 ℃|
|N||-100℃ to 1300℃||±0.5℃|
|R||40℃to 1788℃||±0.5 ℃|
|S||100℃ to 1768℃||±0.5 ℃|
|B||640℃ to 1820℃||±0.5 ℃|
|C||0℃to 2320℃||±0.8 ℃|
|Pin 1||TC -|
|Pin 2||Thermopile +|
|Pin 3||Thermopile -|
|Pin 4||TC +|
|Pin 1||DIO 0||Discrete I/O Signal 0|
|Pin 2||INTR||Interrupt Signal|
|Pin 3||SCL||I2C Clock Signal|
|Pin 4||SDA||I2C Data Signal|
|Pin 5||Shield||Shield Ground|
|Pin 6||DIO 1||Discrete I/O Signal 1|
|Pin 7||GND||Power Ground|
|Pin 8||3.3VDD||Power Supply|
The SP-016 comes with two discrete inputs/outputs. The discrete I/O can be used for a myriad of application including driving relays, physical alarms, or sensing dry contact like door switches. The probe can be configured to act as an edge controller, generating local alarm and control signals based on sensor inputs.
|SP-016-1||Temperature and RTD Smart Probe with discrete I/O|
Omega Link Smart Probes require an Omega Link Smart Interface to operate and connect to your Omega Link Ecosystem. There are both wired and wireless options.
|IF-001||USB Smart Interface|
|IF-002||RS485/Modbus Smart Interface|
An optional M12 4-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-016.
|HFS-5||Economical heat flux sensor|
|M12-S-M-FM||M12 4-pin screw terminal adapter|
|M12.8-T-SPLIT||Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins|
|M12.8-S-M-FM||M12-8 pin Straight Plug Field install connector with screw terminals|
|DM12CAB-8-1-RA||1m (3.3’) cable dual M12-8 connector, right angle terminator|
|DM12CAB-8-3-RA||3m (9.8’) cable dual M12-8 connector, right angle terminator|
|DM12CAB-8-5-RA||5m (16.4’) cable dual M12-8 connector, right angle terminator|
|DM12CAB-8-1||1m (3.3’) cable dual M12-8 straight connector|
|DM12CAB-8-3||3m (9.8’) cable dual M12-8 straight connector|
|DM12CAB-8-5||5m (16.4’) cable dual M12-8 straight connector|