Call us at 1-888-826-6342
Call us at 1-888-826-6342
Copper Immersion Heater 2" NPT Clean Water 1.5-15 kW
UL Listed and Nema 1 Rated Clean Water Immersion 2" NPT
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $239.32 |
| 5-9 | $227.35 |
| 10-24 | $222.57 |
| 25-49 | $212.99 |
| 50-99 | $208.21 |
| 100+ | $203.42 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Rugged General Purpose Models-UL Listed and NEMA-1 Rated
- Optional Moisture Tight/ Explosion Resistant Enclosure Available
- Ideal for pH 6 to pH 8 Clean Liquids
- 1.5 and 15 kW
- 120, 208, 240, 280, and 480 Volts
MT-215A/120V Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Heating Element Length
Power
Power Density
Supply Voltage
Enclosure Type
Form Factor
Connection Type
Supply Voltage Type
Heated Medium
Sheath Material
The OMEGALUX™ MT-2 Series utilizes a copper sheath ideal for clean liquids within the pH6 to 8 pH range.
Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See section P for our selection of process controllers.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.
/* Designates Voltage insert 120 for 120 VAC, 208 for 208 VAC, 240 for 240 VAC, or 280 for 280 VAC
/**Designates Voltage 208 for 208 VAC, 240 for 240 VAC,or 480 for 480 VAC
Those model numbers already containing 240 or 480 are only available in that voltage.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified except model with † (MT-2120A/ 208 & 240 Vac, exceeds 48 Amps.)
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas, except model with † (MT-2120E2/ 208 & 240 Vac, exceeds 48 Amps).
Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See section P for our selection of process controllers.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.
| kW | W/in2 | No. Htg Elem. | Dim. B in (cm) | E-1 Gen. Purpose Enclosure1 Model No. | Wt. Ib. (kg) | E2 Explos. Res/Moist. Tight Encl.2 Model No. | Wt. Ib. (kg) |
| 1.5 | 48 | 1 | 12 (30) | MT-215A/* | 3 (1) | MT-215E2/* | 6 (3) |
| 2 | 48 | 1 | 18 (46) | MT-220A/* | 3 (1) | MT-220E2/* | 6 (3) |
| 2.5 | 51 | 2 | 8 (20) | MT-220-3A/* | 3 (1) | MT-220-3E2/* | 6 (3) |
| 3 | 48 | 2 | 9 1/2 (24) | MT-225A/* | 3 (1) | MT-225E2/* | 6 (3) |
| 4 | 48 | 2 | 12 (30) | MT-230A/* | 4 (2) | MT-230E2/* | 7 (3) |
| 5 | 48 | 2 | 18 (46) | MT-240A/* | 4 (2) | MT-240E2/* | 7 (3) |
| 6 | 53 | 2 | 19 13/16 (49) | MT-250A/* | 5 (2) | MT-250E2/* | 8 (4) |
| 6 | 47 | 2 | 25 1/8(64) | MT-260A/240 | 5 (2) | MT-260E2/240 | 8 (4) |
| 7 | 47 | 2 | 25 1/8 (64) | MT-260A/480 | 5 (2) | MT-260E2/480 | 8 (4) |
| 7 | 49 | 2 | 28 (71) | MT-270A/240 | 6 (3) | MT-270E2/240 | 9 (5) |
| 10 | 49 | 2 | 40 1/2 (103) | MT-270A/480 | 6 (3) | MT-270E2/480 | 9 (5) |
| 12 | 46 | 2 | 48 (122) | MT-2100A/* | 7 (3) | MT-2100E2/* | 10 (5) |
| 12 | 46 | 2 | 48 (122) | MT-2120A/**† | 8 (4) | MT-2120E2/**† | 11 (5) |
/**Designates Voltage 208 for 208 VAC, 240 for 240 VAC,or 480 for 480 VAC
Those model numbers already containing 240 or 480 are only available in that voltage.
1 Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified except model with † (MT-2120A/ 208 & 240 Vac, exceeds 48 Amps.)
2 Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas, except model with † (MT-2120E2/ 208 & 240 Vac, exceeds 48 Amps).
