Bidirectional, Differential Low Pressure Transducers
0 to 10 inH2O, Differential Pressure
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-4 | $247.82 |
5-9 | $242.86 |
10-24 | $237.91 |
25-49 | $227.99 |
50-99 | $225.52 |
100+ | $223.04 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- For Dry Gases
- Ranges from 0.25 inH2 O to 100 inH2 O
- For Use in Building Management, HVAC Ducts or Clean Rooms
- Works with Unregulated Voltage Source
- Fully Protected Against Incorrect Wiring
PX2650-10D5V Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Range Min
Pressure Range Max
Pressure Range
Pressure Range Unit
Pressure Type
Accuracy Class
Accuracy Value(compensated range)
Output Signal
Electrical Output
Pressure Port Size
Pressure Port Type
Connection/Termination
Operating Temperature Range
- Accuracy Value Capacitive
- Excitation 9 to 30 Vdc unregulated
- Maximum Compensation Temperature -18°C (0°F)
- Minimum Compensation Temperature -18°C (0°F)
- Repeatability ±0.05% FS Compensated Temperature Range: -18 to 65°C (0 to 149°F)
SPECIFICATIONS
Excitation: 9 to 30 Vdc unregulated
Output Impedance: <100Ω
Output Span: Set to 5 Vdc ±50 mV
Zero Offset: Set to ±50 mV
Accuracy: ±1% BFSL at constant temperature (includes linearity, repeatability and hysteresis)
Linearity: ±0.98% FS (typical)
Hysteresis: 0.1% FS (typical)
Repeatability: ±0.05% FS Compensated Temperature Range: -18 to 65°C (0 to 149°F)
Thermal Effects: ±0.06%/°C (#177;0.033%/°F)
Proof Pressure: ±10 psi, all ranges
Position Effect: Factory calibration with diaphragm vertical
Sensor: Capacitive
Media: Air or similar non-conducting gases
Pressure Port: 3/16' OD pressure fitting for 1/4' tube
Case: Fire-retardant glass-filled polyester
Mounting: 2 tabs with #8 holes
Electrical Connection: Screw terminals
Weight: 85 g (3 oz)
Excitation: 9 to 30 Vdc unregulated
Output Impedance: <100Ω
Output Span: Set to 5 Vdc ±50 mV
Zero Offset: Set to ±50 mV
Accuracy: ±1% BFSL at constant temperature (includes linearity, repeatability and hysteresis)
Linearity: ±0.98% FS (typical)
Hysteresis: 0.1% FS (typical)
Repeatability: ±0.05% FS Compensated Temperature Range: -18 to 65°C (0 to 149°F)
Thermal Effects: ±0.06%/°C (#177;0.033%/°F)
Proof Pressure: ±10 psi, all ranges
Position Effect: Factory calibration with diaphragm vertical
Range | Zero Offset (%FS/G) |
---|---|
0 to 0.5 in H2O | 0.6 |
0 to 1 in H2O | 2.2 |
0 to 5 in H2O | 1.4 |
Sensor: Capacitive
Media: Air or similar non-conducting gases
Pressure Port: 3/16' OD pressure fitting for 1/4' tube
Case: Fire-retardant glass-filled polyester
Mounting: 2 tabs with #8 holes
Electrical Connection: Screw terminals
Weight: 85 g (3 oz)



Could you please tell me the resolution of the A/D converter on model PX2650-10D5V?
The PX2650-10D5V simply has a linear 0 to 5VDC signal output over it's 0 to 10" wc differential pressure. Signal resolution wonder depend on the input signal resolution of the device you are reading this signal with.
Date published: 2020-02-28