Sanitary Pressure Transducers/Transmitters

- FAST DELIVERY! Stock to 1-Week!
- High 0.08% Accuracy Sanitary Pressure Transducers
- Solid State Sensor for Durability
- Excellent Long Term Stability
- 316L SS Wetted Parts
- Shock and Vibration Rated
- High Overpressure Rating
- Ruggedized with Secondary Containment
- Now Available with M12 Connector, Order Model PX459
- Sanitary Pressure Transmitter with 4-20 mA Output
- Gage and Absolute Pressure to 600 psi
Compound Gage ±10 inH2O to ±15 psi
Sealed Gage 100 to 600 psi
Vacuum 10 inH2O to 15 psi - 5-pt NIST Traceable Calibration Included
- Accuracy Value ±0.08% BSL (linearity
- Maximum Compensation Temperature -4°C (25°F)
- Minimum Compensation Temperature -4°C (25°F)
- Vibration ±20 g (under test)
- Shock 50 g
- Wetted Materials 316L Stainless Steel
- Zero Balance ±0.5% FS typical
SPECIFICATIONS
Accuracy: 0.08% Best Straight Line (Linearity, Hysteresis and Repeatability combined)
Operating Temperature Range: -15 to 115°C (-5 to 240°F)
Compensated Temperature Range: -4 to 85°C (25 to 185°F)
Temperature Compensation: Zero and Span Combined
≥5psi: 1% over 55.6°C (100°F) range
≤2.5 psi: 2% over 55.6°C (100°F) range
Min Isolation Between Case and Output Terminations: 100 MΩ @ 50 Vdc
Pressure Cycles: 250,000, minimum
Long Term Stability (1-Year): ±0.1% FS typ.
Shock: 50 g, 11 ms half sine shock, (under test)
Vibration: ±20 g (under test)
Bandwidth: DC to 1 kHz typical
Response Time: <1 ms
Fill Fluid: NEOBEE M5 Food grade
CE Compliant: Meets industrial emissions and immunity standard IEC61326
Environmental Protection: IP65 or IP67 depending upon electrical termination
Pressure Rating: 1½ and 2 in Tri-Grip™ (Tri-Clamp® compatible) fitting: 600 psi using suitable clamp
Over Pressure: 4 x rated pressure to maximum rated flange pressure
Secondary Containment: 6 x rated pressure to a maximum of 2000 psi (not in clamp)
Wetted Parts: 316L SS
Weight: 285 gm (10 oz)
Zero Balance: ±0.5% FS typical, 1% max (For ranges ≤2.5 psi ±1% typ 2% max)
Span Setting: ±0.5% FS typical, 1% max (For ranges ≤2.5 psi, ±1% typ 2% max)
Calibrated in vertical position with fitting down
10 mV/V OUTPUT
Output/Supply: 10 mV/V; Ratiometric 5 to 10 Vdc
AMPLIFIED VOLTAGE OUTPUT
Output/ Supply:
0 to 5 Vdc: 10 to 30 Vdc @ 10 mA
0 to 10 Vdc: 15 to 30 Vdc @ 10 mA
CURRENT OUTPUT
Output: 4 to 20 mA
Supply Voltage: 9 to 30 Vdc max loop res Ω = (Vs-9)x50 [9 to 20 Vdc above 105°C (229°F)]
Use the part number builder below to order models not shown. Specify the fitting size, pressure range, output, and electrical termination desired.


CE Approved

Accessories
5 m (16') PVC cable, straight 4-pin M12 female connector one end, flying leads one end, for all PX359 absolute range and gage ranges >100 psi
$18.23
27 In Stock