Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Colorimeter Testing Reagents
Colorimeter
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Water Resistant Design
- Improved Accuracy
- Auto-Zero
- Hinged Light Cover
- Digital Direct
- RS-232 Interface
R-DC1200-CL Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Test Parameter
Description
The new DC-1200 Series of single-test, direct-reading colorimeters incorporates design advances that enhance reliability, improve accuracy and simplify the calibration process–all in a portable, handheld package. Designed with protection against excessive exposure to moisture in mind, the DC-1200 Series colorimeters deliver trouble-free performance in the field and lab. A microprocessor enables the factory-programmed calibrations to optimally match non-linear curves. Simply insert the blank sample and press the zero key. No more dialing in the zero. “Up” and “down” arrows enable easy calibrations to a standard for compliance monitoring a flip-top lid over the sample chamber eliminates any stray light, especially in the field, and prevents misplacing separate light caps. The large 3- 1 /2 " digital display presents measurements in actual ppm concentration and indicates low battery warnings. An RS-232 port is provided to interface with a datalogger or computer. The DC-1200 Chlorine Colorimeter Kit uses unit-dose DPD tablets or DPD liquid reagents.
