SCR Power Controllers or Electrical Resistance Heaters 250A Max
SCR Power Controllers
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $2,180.00 |
| 10-24 | $2,071.00 |
| 25-49 | $2,027.40 |
| 50-99 | $1,940.20 |
| 100-199 | $1,896.60 |
| 200+ | $1,853.00 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Zero Crossing or Phase-Angle Fired
- Diagnostic LED Indicators
- Single- or 3-Phase Load Switching
- Extends Heater Life -- Reduces Thermal Shock
- No Maintenance -- All Solid State Components
- Close Control of Low Mass Heaters
- Phase Angle with Soft Start for High Inrush Heaters
- No Relay Noise--Contact Arc Noise Eliminated
- Semiconductor I²T Fusing
- Optically Isolated 4 to 20 mA Control Signal Input
- Fan Cooled
SCR39Z-H-48-250 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
AC Line Voltage
Phase
Nominal Load Current
Features
Control Signal Type
The SCR19-H and SCR39-H Series power controllers are designed to proportion electric power to resistive loads only, such as ovens, furnaces, heat sealers, etc. The controllers consist of power semi-conductors (SCRs), properly sized heat sinks, trigger circuitry, and fuses supplied on panels for surface mounting. (Note: They are not designed to drive transformers or any inductive load.) The power controller accepts a 4 to 20 mAdc output from a temperature controller.
Zero Voltage Switched Models
The SCR19Z-H and SCR39Z-H SCR power controllers are zero crossover fired, high-power solid state switched devices. Zero crossover firing eliminates the RFI generation associated with mechanical relays. With zero crossover firing, the output appears as bursts of full sine waves of line voltage which provides excellent regulation to the load.
Phase Angle Fired Models
The SCR19P-H and SCR39P-H SCR phase-angle fired power controllers turn on each SCR for a controlled portion of a half-cycle of the line voltage. The effective line voltage is determined by the portion of the line voltage delivered, which is proportional to the input control signal. Additionally, the voltage is regulated as the line voltage changes.
Dimensions mm (inches): Note: When fuses are added to unit, add 83 mm (3.3") to height.
Specifications
Supply Voltage: 120 to 600 Vac
Frequency: 50 to 60 Hz
Current Rating: 125 to 250 A Input Control Signal Isolation: 2500 Vac
Transient Voltage Protection: Inherent built-in immunity
Ambient Temperature: 0 to 50°C (32 to 122°F)
Load: Resistive
SCR39Z-H: 1-phase, 2-leg control for 3-wire delta, 3-phase ungrounded wye
SCR19Z-H: 1-phase, 1-leg control
SCR39P-H: 3-phase, 3-leg half control for 3-wire delta or 3-phase ungrounded wye
SCR19P-H: 1-phase, 1-leg control
Diagnostic Indicators: Shorted or open SCR
Cooling: Fan cooled, requires 120 Vac control voltage
Note: To Order Phase-Firing Models, see Part Number Builder section below.
Zero Voltage Switched Models
The SCR19Z-H and SCR39Z-H SCR power controllers are zero crossover fired, high-power solid state switched devices. Zero crossover firing eliminates the RFI generation associated with mechanical relays. With zero crossover firing, the output appears as bursts of full sine waves of line voltage which provides excellent regulation to the load.
Phase Angle Fired Models
The SCR19P-H and SCR39P-H SCR phase-angle fired power controllers turn on each SCR for a controlled portion of a half-cycle of the line voltage. The effective line voltage is determined by the portion of the line voltage delivered, which is proportional to the input control signal. Additionally, the voltage is regulated as the line voltage changes.
Dimensions mm (inches): Note: When fuses are added to unit, add 83 mm (3.3") to height.
| Model No. | Height | Width | Depth |
| SCR19Z-H | 222.25 (8.750) | 135.12 (5.320) | 370.84 (14.6) |
| SCR19P-H | 222.25 (8.750) | 135.12 (5.320) | 370.84 (14.60) |
| SCR39Z-H | 222.25 (8.750) | 287.02 (11.30) | 370.84 (14.60) |
| SCR39P-H | 222.25 (8.750) | 394.46 (15.530) | 370.84 (14.6) |
Specifications
Supply Voltage: 120 to 600 Vac
Frequency: 50 to 60 Hz
Current Rating: 125 to 250 A Input Control Signal Isolation: 2500 Vac
Transient Voltage Protection: Inherent built-in immunity
Ambient Temperature: 0 to 50°C (32 to 122°F)
Load: Resistive
SCR39Z-H: 1-phase, 2-leg control for 3-wire delta, 3-phase ungrounded wye
SCR19Z-H: 1-phase, 1-leg control
SCR39P-H: 3-phase, 3-leg half control for 3-wire delta or 3-phase ungrounded wye
SCR19P-H: 1-phase, 1-leg control
Diagnostic Indicators: Shorted or open SCR
Cooling: Fan cooled, requires 120 Vac control voltage
Note: To Order Phase-Firing Models, see Part Number Builder section below.
Can multiple electric heaters be powered through a single SCR Controller. I have an application where ideally 3 to 6 heaters would be controlled by a single SCR controller. Each heater is 750 watts and voltage is 208/1/60V ?
Hi Maxwell,
You can connect multiple heaters to a single SCR controller. The heaters are wired in parallel then wired in a series circuit with the SCR and your power source. The maximum number of heaters would depend on the maximum current rating of the SCR.
In your example (6) heaters x 750 watts each = 4500 total watts
Current = 4500 / 208 = 21.63 amps The SCR needed would have a max current rating of 22 amps or greater for this application
Best regards,
Omega
Date published: 2021-08-30