Threaded and Flanged 316SS Positive Displacement Flow MetersPositive Displacement Flow Meter for Industrial Processes
Please add to cart to keep it or exit the configuration
- Stainless Steel Body
- FEP Seals
- PPS Rotors
- Temperatures up to 80ºC (176ºF)
- NPT or BSP Threads
- DIN, JIS or ANSI Connection (Available on 1" and Larger Sizes)
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The FPD3200 Series positive displacement flowmeters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to measurement for many industrial as well as other non-abrasive lubricating fluids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPD3200 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.
Accuracy: ±0.5% of reading
BSP: “-BSP” option
DIN: “-DIN” option
JIS: “-JIS” option
ANSI: “-ANSI” option
Hall-Effect Sensor Power: 4.5 to 24 Vdc (7.5 mA)
Reed Sensor Power: 30 Vdc (500 mA)
Pulse Output: Standard
4 to 20 mA Transmitter: “-D-A” option; no output on battery powered “-D” model
Display: 7-digit/12 mm (0.47") upper, 7-digit/7 mm (0.28") lower all “-D” options
Rate: User defined
Minimum Viscosity: 1 cPs
Maximum Viscosity: 1000 cPs standard
Maximum Pressure: See chart on page F-3
Strainer Size: See chart on next page
Mounting: Shafts must be in a horizontal plane
Electrical Connections: 2 x 12 mm (0.08 x 0.47"), fittings included “-D-A” option
Cable Length: 1 m (3') stripped ends, non-display models
Power: 4 to 20 mA, “-D-A” models 18 to 30 Vdc display, “-D” models 3 Vdc lithium battery (included)
Liquid Temperature: -40 to 80°C (-40 to 176°F)
Body: 316 Stainless steel
Fasteners: Stainless steel
Cable Insulation: PVC
Enclosure: NEMA 6 (IP67)
How to connect the FPD3205 to the DP3300-TC-4? which wires from meter go to display inputs? Pulse input?
I was told that the FPD3205 wont work with DP3300-TC-4? planning on buying replacement display DPF75 so the flowmeter has power. is this the best choice with using FPD3205? I strictly need to display flow rate. (GPM)
Does the Positive Displacement Flow meters have any failure modes that would impend the process flow?
Is the meter calibrated? Can it be used for DI water? Thanks
Is this positive displacement flow meter suitable for measuring ~1Hz pulsatile flow or would a different product be preferred for that kind of application?