Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Easy-View Flow Meters with Adjustable Flow Alarm
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Easy to Install, In Any Position
- No Special Piping or Flow Straighteners Required
- Automatically Signals Alarm
- ±5% FS Accuracy
- ±1% FS Repeatability
- Direct Reading Scale
FL9518-AC Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Media Type
Liquid Flow Range
Process Connection Type
Process Connection Size
Wetted Materials
Features
Category
Accuracy
Max Operating Pressure
Max Process Temperature
Scale
Valve Included
The FL9000-AC Series flowmeters are ideal for a wide range of flow monitoring applications. These low cost flow meters will install in any position easily. Additional features include an adjustable flow alarm externally mounted on the flow meter. The flow alarm will automatically open or close AC electrical circuits, activating warning lights, bells, pumps or other process control equipment.
SPECIFICATIONS
Wetted Parts: T300 series stainless steel spring, strontium ferrite magnet, Buna O-rings (for units with brass end fittings)
Maximum Pressure: 22.4 bar (325 psig)
Maximum Temperature: 121°C (250°F); relay rated to 70°C (158°F)
Maximum Particle Size: 74 microns
Alarm Relay: Latching relay circuit housed in a sealed polypropylene enclosure. Relay pulls in over 25% of span and drops out above and below that. Includes mating connector. Relay is field replaceable; rated 1 A @ 30 Vdc (-DC models), 0.5 @ 125 Vac (-AC models), resistive load
Setpoint: Adjustable 0 to 100%FS
Hex Fittings: 38.1 mm (1.5") flats
*Fits 3/4" Nominal (7/8" OD) and 1" Nominal (1-1/8" OD) type M copper tubing.
**Do not use pipe dope when mounting, use PTFE tape only.
SPECIFICATIONS
Wetted Parts: T300 series stainless steel spring, strontium ferrite magnet, Buna O-rings (for units with brass end fittings)
Maximum Pressure: 22.4 bar (325 psig)
Maximum Temperature: 121°C (250°F); relay rated to 70°C (158°F)
Maximum Particle Size: 74 microns
Alarm Relay: Latching relay circuit housed in a sealed polypropylene enclosure. Relay pulls in over 25% of span and drops out above and below that. Includes mating connector. Relay is field replaceable; rated 1 A @ 30 Vdc (-DC models), 0.5 @ 125 Vac (-AC models), resistive load
Setpoint: Adjustable 0 to 100%FS
Hex Fittings: 38.1 mm (1.5") flats
| Media (Piston Type) | Flow Range (GPM) | Model Number 3/4" and 1" Nominal Brass Sweat Fitting* | Length/ Weight | Model Number 1" Male NPT Polysulfone** | Length/ Weight | Model Number 3/4" Male NPTF Brass | Length Weight |
| Oil (Std Piston) | 0.5 to 4 1.0 to 7 1.0 to 10 1.0 to 16 3.0 to 18 4.0 to 28 | NOT AVAILABLE | - | FL9104-AC FL9107-AC FL9110-AC FL9116-AC FL9118-AC FL9128-AC | 133.3 mm (5.25") 0.09 kg (3.2 oz) | FL9504-AC FL9507-AC FL9510-AC FL9516-AC FL9518-AC FL9528-AC | 209.5 mm (8.25") 0.41 kg (14.4 oz) |
| Water (Std Piston) | 0.5 to 4 1.0 to 7 1.0 to 10 1.0 to 16 3.0 to 18 4.0 to 28 | FL9204-AC FL9207-AC FL9210-AC FL9216-AC FL9218-AC FL9228-AC | 196.8 mm (7.75") 0.34 kg (12 oz) | FL9004-AC FL9007-AC FL9010-AC FL9016-AC FL9018-AC FL9028-AC | 133.3 mm (5.25") 0.09 kg (3.2 oz) | FL9404-AC FL9407-AC FL9410-AC FL9416-AC FL9418-AC FL9428-AC | 209.5 mm (8.25") 0.41 kg (14.4 oz) |
**Do not use pipe dope when mounting, use PTFE tape only.
