Low Capacity, Female/Female, Inline Tension Link Load Cell250 lbf, ±0.1%, Linearity, 3 mV/V Output, Cable
Please add to cart to keep it or exit the configuration
- All Stainless Steel Construction
- Accuracy 0.15%
- Rugged Design for Industrial Applications
- 5 Point Calibration with 59 kOhm Shunt Cal Data
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
This product is no longer available. Please refer to LC703.These stainless steel load cells are ideal for measuring in-line tension forces. Applications vary from cables on cranes, support rods in architectural designs, engine test beds, to industrial weighing applications. The LC701 Tension Link has a 6 ft. (2 m) cable while the LC711 has an integral MS style connector.
The LC701 and LC711 are also available in metric configurations, with ranges from 0-50 to 0-1000 kgf and metric threads. Please see the LCM701 for complete details, or contact our Pressure department for more information.
Output: 3 mV/V ±0.25% FSO
Excitation: 10 Vdc (15V max)
>100 lb: ±0.10% FSO
?100 lb: ±0.20% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.05% FSO
Zero Balance: ±1.0% FSO
Operating Temp. Range: -46 to 121°C (-50 to 250°F)
Compensated Temp. Range: 16 to 71°C (60 to 160°F)
Zero: ±0.0045% FSO/°C
Span: ±0.007% rdg/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ?
Full Scale Deflection: 0.025 to 0.102 mm (0.001 to 0.004")
Construction: Stainless steel
LC701/LCM701: 1.8 m (6') insulated 4-conductor shielded cable
LC711/LCM711: DT02H-10-6P integral connector
Mating connector, LC711/LCM711: PT06F10-6S, sold separately
Weight: 0.45 kg (1 lb)