text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Circulation Heaters for Fuel Oils

Item# CHF01100

Circulation Heaters for Fuel Oils Circulation Heaters for Fuel Oils
Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elements2.22CHF01100(1)CHF01101(1)3717
2.33CHF01102(1)CHF01101(1)4621
3"—150 lb 3 elements3.22CHF01104(1)CHF01105(1)6228
3.33CHF01106(1)CHF01107(1)7634
(C*) = Number of Branch Circuits per heater
Circulation Heaters
Nominal Pipe SizeModel No.Dimensional Drawing No.KWApproximate Weight
240V-3Ph (C*)480V-3Ph (C*)lbkg
4"—150 lb 6 elementsCHF01108(1)CHF01109(1)4.3511753
CHF01110(1)CHF01111(1)4.3612054
CHF01112(1)CHF01113(1)4.4814767
CHF01114(1)CHF01115(1)4.41015168
5"—150 lb 6 elementsCHF01116(1)CHF01117(1)5.2512858
CHF01118(1)CHF01119(1)5.3614666
CHF01120(1)CHF01121(1)5.4817278
CHF01122(1)CHF01123(1)5.51019287
5"—150 lb 9 elementsCHF01124(1)CHF01125(1)5.27.513561
CHF01126(1)CHF01127(1)5.3915470
CHF01128(1)CHF01129(1)5.41218383
CHF01130(1)CHF01131(1)5.51520593
6"—150 lb 12 elementsCHF01132(1)CHF01133(1)6.2815771
CHF01134(1)CHF01135(1)6.31019780
CHF01136(1)CHF01137(1)6.31220292
CHF01138(1)CHF01139(1)6.416.5249113
CHF01140(1)CHF01141(1)6.420257117
6"—150 lb 15 elementsCHF01142(1)CHF01143(1)6.21016374
CHF01144(1)CHF01145(1)6.312.520493
CHF01146(1)CHF01147(1)6.31521196
CHF01148(5)CHF01149(1)6.421260118
CHF01150(5)CHF01151(1)6.425273124
8"—150 lb 18 elementsCHF01152(1)CHF01153(1)8.312.5272123
CHF01154(1)CHF01155(1)8.416.5300136
CHF01156(1)CHF01157(1)8.520334151
CHF01158(2)CHF01159(1)8.624367166
CHF01160(2)CHF01161(1)8.727402182
8"—150 lb 24 elementsCHF01162(1)CHF01163(1)8.317287130
CHF01164(2)CHF01165(1)8.422318144
CHF01166(2)CHF01167(1)8.527356161
CHF01168(2)CHF01169(1)8.632386175
CHF01170(2)CHF01171(1)8.736428194
10"—150 lb 27 elementsCHF01172(3)CHF01173(1)10.330537244
CHF01174(3)CHF01175(1)10.435580263
CHF01176(3)CHF01177(1)10.540623283
12"—150 lb 36 elementsCHF01178(3)CHF01179(2)12.447751341
CHF01180(3)CHF01181(2)12.554793360
14"—150 lb 45 elementsCHF01182(3)CHF01183(3)14.460885401
CHF01184(5)CHF01185(3)14.567941427
Ordering Examples: CHF01106, 3 KW, 240 Vac, 3 phase circulation heater. CHF01141, 20 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 7 watts/in2 (1.1 watts/cm2)
CHF01100
  • Standard Element Sheath Materials
  • Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
  • Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
  • 316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
  • Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.
Power
Power Density
Sheath Material
Number of Elements
Supply Voltage
See All Options
Quantity Price each
1-4 $1,662.00
5-9 $1,578.90
10-24 $1,545.66
25-49 $1,479.18
50-99 $1,445.94
100+ $1,412.70

In stock

Lead Time ( If not in Stock): 5 weeks

Product Specs

  • Heated Medium Fluid Heat Transfer Media
  • Pipe Size 1 1/4 NPT to 14 in Flange

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elements2.22CHF01100(1)CHF01101(1)3717
2.33CHF01102(1)CHF01101(1)4621
3"—150 lb 3 elements3.22CHF01104(1)CHF01105(1)6228
3.33CHF01106(1)CHF01107(1)7634
(C*) = Number of Branch Circuits per heater
Circulation Heaters
Nominal Pipe SizeModel No.Dimensional Drawing No.KWApproximate Weight
240V-3Ph (C*)480V-3Ph (C*)lbkg
4"—150 lb 6 elementsCHF01108(1)CHF01109(1)4.3511753
CHF01110(1)CHF01111(1)4.3612054
CHF01112(1)CHF01113(1)4.4814767
CHF01114(1)CHF01115(1)4.41015168
5"—150 lb 6 elementsCHF01116(1)CHF01117(1)5.2512858
CHF01118(1)CHF01119(1)5.3614666
CHF01120(1)CHF01121(1)5.4817278
CHF01122(1)CHF01123(1)5.51019287
5"—150 lb 9 elementsCHF01124(1)CHF01125(1)5.27.513561
CHF01126(1)CHF01127(1)5.3915470
CHF01128(1)CHF01129(1)5.41218383
CHF01130(1)CHF01131(1)5.51520593
6"—150 lb 12 elementsCHF01132(1)CHF01133(1)6.2815771
CHF01134(1)CHF01135(1)6.31019780
CHF01136(1)CHF01137(1)6.31220292
CHF01138(1)CHF01139(1)6.416.5249113
CHF01140(1)CHF01141(1)6.420257117
6"—150 lb 15 elementsCHF01142(1)CHF01143(1)6.21016374
CHF01144(1)CHF01145(1)6.312.520493
CHF01146(1)CHF01147(1)6.31521196
CHF01148(5)CHF01149(1)6.421260118
CHF01150(5)CHF01151(1)6.425273124
8"—150 lb 18 elementsCHF01152(1)CHF01153(1)8.312.5272123
CHF01154(1)CHF01155(1)8.416.5300136
CHF01156(1)CHF01157(1)8.520334151
CHF01158(2)CHF01159(1)8.624367166
CHF01160(2)CHF01161(1)8.727402182
8"—150 lb 24 elementsCHF01162(1)CHF01163(1)8.317287130
CHF01164(2)CHF01165(1)8.422318144
CHF01166(2)CHF01167(1)8.527356161
CHF01168(2)CHF01169(1)8.632386175
CHF01170(2)CHF01171(1)8.736428194
10"—150 lb 27 elementsCHF01172(3)CHF01173(1)10.330537244
CHF01174(3)CHF01175(1)10.435580263
CHF01176(3)CHF01177(1)10.540623283
12"—150 lb 36 elementsCHF01178(3)CHF01179(2)12.447751341
CHF01180(3)CHF01181(2)12.554793360
14"—150 lb 45 elementsCHF01182(3)CHF01183(3)14.460885401
CHF01184(5)CHF01185(3)14.567941427
Ordering Examples: CHF01106, 3 KW, 240 Vac, 3 phase circulation heater. CHF01141, 20 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 7 watts/in2 (1.1 watts/cm2)

en-US
en
Save Configuration