text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Circulation Heaters for Heat Transfer Oils, Liquid Paraffin, Degreasing Solutions and Light/Medium Weight Oils

Item# CHF01385

Circulation Heaters for Heat Transfer Oils, Liquid Paraffin, Degreasing Solutions and Light/Medium Weight Oils Circulation Heaters for Heat Transfer Oils, Liquid Paraffin, Degreasing Solutions and Light/Medium Weight Oils
Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elements2.22CHF01100(1)CHF01101(1)3717
2.33CHF01102(1)CHF01101(1)4621
3"—150 lb 3 elements3.22CHF01104(1)CHF01105(1)6228
3.33CHF01106(1)CHF01107(1)7634
(C*) = Number of Branch Circuits per heater
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Lightweight Oils, Degreasing Solutions, Heat Transfer Oils
Nominal Pipe SizeModel No.Dimensional Drawing NumberKWApproximate Weight
480V-3Ph (C*)lbkg
10"—150 lb 27 elementsCHF01384(3)10.390537244
CHF01385(3)10.4105580263
CHF01386(3)10.5120623283
12"—150 lb 36 elementsCHF01387(4)12.4140751341
CHF01388(4)12.5160793360
14"—150 lb 45 elementsCHF01389(5)14.3150824374
CHF01390(5)14.4175885401
CHF01391(5)14.5200941427
Ordering Example: CHF01386, 120 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
16 watts/in2 (2.5 watts/cm2)—Typical Applications: Medium Weight Oils, Heat Transfer Oils, Liquid Paraffin.
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeModel No.Dimensional Drawing NumberKWApproximate Weight
240V-3Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elementsCHF01392(1)CHF01393(1)2.122813
CHF01394(1)CHF01395(1)2.12.52913
CHF01396(1)CHF01397(1)2.133014
CHF01398(1)CHF01399(1)2.243717
CHF01400(1)CHF01401(1)2.354520
CHF01402(1)CHF01403(1)2.364621
3”—150 lb 3 elementsCHF01404(1)CHF01405(1)3.125324
CHF01406(1)CHF01407(1)3.12.55324
CHF01408(1)CHF01409(1)3.236128
CHF01410(1)CHF01411(1)3.246228
CHF01412(1)CHF01413(1)3.357434
CHF01414(1)CHF01415(1)3.367634
Ordering Example: CHF01396, 3 KW, 240 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
CHF01385
  • Standard Element Sheath Materials
  • Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
  • Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
  • 316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
  • Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.
Power
Power Density
Sheath Material
Number of Elements
Supply Voltage
See All Options
Quantity Price each
1-4 $10,995.00
5-9 $10,445.25
10-24 $10,225.35
25-49 $9,785.55
50-99 $9,565.65
100+ $9,345.75

In stock

Lead Time ( If not in Stock): 5 weeks

Product Specs

  • Heated Medium Heat Transfer Oils
  • Pipe Size 1 1/4 NPT to 14 in Flange

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elements2.22CHF01100(1)CHF01101(1)3717
2.33CHF01102(1)CHF01101(1)4621
3"—150 lb 3 elements3.22CHF01104(1)CHF01105(1)6228
3.33CHF01106(1)CHF01107(1)7634
(C*) = Number of Branch Circuits per heater
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Lightweight Oils, Degreasing Solutions, Heat Transfer Oils
Nominal Pipe SizeModel No.Dimensional Drawing NumberKWApproximate Weight
480V-3Ph (C*)lbkg
10"—150 lb 27 elementsCHF01384(3)10.390537244
CHF01385(3)10.4105580263
CHF01386(3)10.5120623283
12"—150 lb 36 elementsCHF01387(4)12.4140751341
CHF01388(4)12.5160793360
14"—150 lb 45 elementsCHF01389(5)14.3150824374
CHF01390(5)14.4175885401
CHF01391(5)14.5200941427
Ordering Example: CHF01386, 120 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
16 watts/in2 (2.5 watts/cm2)—Typical Applications: Medium Weight Oils, Heat Transfer Oils, Liquid Paraffin.
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeModel No.Dimensional Drawing NumberKWApproximate Weight
240V-3Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elementsCHF01392(1)CHF01393(1)2.122813
CHF01394(1)CHF01395(1)2.12.52913
CHF01396(1)CHF01397(1)2.133014
CHF01398(1)CHF01399(1)2.243717
CHF01400(1)CHF01401(1)2.354520
CHF01402(1)CHF01403(1)2.364621
3”—150 lb 3 elementsCHF01404(1)CHF01405(1)3.125324
CHF01406(1)CHF01407(1)3.12.55324
CHF01408(1)CHF01409(1)3.236128
CHF01410(1)CHF01411(1)3.246228
CHF01412(1)CHF01413(1)3.357434
CHF01414(1)CHF01415(1)3.367634
Ordering Example: CHF01396, 3 KW, 240 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater

en-US
en
Save Configuration