text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Circulation Heaters for Forced Air & Gases, Caustic Solutions, Degreasing Solutions

Item# CHF01499

Circulation Heaters for Forced Air & Gases, Caustic Solutions, Degreasing Solutions Circulation Heaters for Forced Air & Gases, Caustic Solutions, Degreasing Solutions
Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
2½ NPT 3 elements2.22CHF01100(1)CHF01101(1)3717
2.33CHF01102(1)CHF01101(1)4621
3"—150 lb 3 elements3.22CHF01104(1)CHF01105(1)6228
3.33CHF01106(1)CHF01107(1)7634
(C*) = Number of Branch Circuits per heater
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Forced Air & Gases, Caustic Solutions, Degreasing Solutions
Nominal Pipe SizeModel NumberDim Drawing NumberKWApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
114NPT 2 elementsCHF01498CHF01499(1)1.11136
CHF01500CHF01501(1)1.11.5136
CHF01502CHF01503(1)1.22178
2½NPT 3 elementsCHF01504(1)CHF01505(1)CHF01506(1)CHF01507(1)2.132813
CHF01508(1)CHF01509(1)CHF01510(1)CHF01511(1)2.24.53516
CHF01512(1)CHF01513(1)CHF01514(1)CHF01515(1)2.263717
CHF01516(1)CHF01517(1)CHF01518(1)CHF01519(1)2.37.54520
CHF01520(1)CHF01521(1)CHF01522(1)CHF01523(1)2.394621
3"—150 lb 3 elementsCHF01524(1)CHF01525(1)CHF01526(1)CHF01527(1)3.135324
CHF01528(1)CHF01529(1)CHF01530(1)CHF01531(1)3.24.56128
CHF01532(1)CHF01533(1)CHF01534(1)CHF01535(1)3.266228
CHF01536(1)CHF01537(1)CHF01538(1)CHF01539(1)3.37.57434
CHF01540(1)CHF01541(1)CHF01542(1)CHF01543(1)3.397634
4"—150 lb 6 elementsCHF01544(1)CHF01545(1)CHF01546(1)CHF01547(1)4.167835
CHF01548(1)CHF01549(1)CHF01550(1)CHF01551(1)4.299141
CHF01552(2)CHF01553(1)CHF01554(1)CHF01555(1)4.2129443
CHF01556(2)CHF01557(1)CHF01558(1)CHF01559(1)4.31511753
CHF01560(2)CHF01561(1)CHF01562(1)CHF01563(1)4.31812054
CHF01564(2)CHF01565(2)CHF01566(1)4.42514767
CHF01567(2)CHF01568(2)CHF01569(1)4.43015168
5"—150 lb 6 elementsCHF01570(1)CHF01571(1)CHF01572(1)CHF01573(1)5.1911452
CHF01574(2)CHF01575(1)CHF01576(1)CHF01577(1)5.21212657
CHF01578(2)CHF01579(1)CHF01580(1)CHF01581(1)5.21512858
CHF01582(2)CHF01583(1)CHF01584(1)CHF01585(1)5.31814666
CHF01586(2)CHF01587(2)CHF01588(1)5.42517278
CHF01589(2)CHF01590(2)CHF01591(1)5.53019287
5"—150 lb 9 elementsCHF01592(3)CHF01593(1)CHF01594(1)CHF01595(1)5.11411954
CHF01596(3)CHF01597(1)CHF01598(1)CHF01599(1)5.21813260
CHF01600(3)CHF01601(3)CHF01602(1)CHF01603(1)5.22313561
CHF01604(3)CHF01605(3)CHF01606(3)CHF01607(1)5.32715068
CHF01608(3)CHF01609(3)CHF01610(1)5.43818383
CHF01611(3)CHF01612(3)CHF01613(3)5.54520593
6"—150 lb 12 elementsCHF01614(2)CHF01615(1)CHF01616(1)CHF01617(1)6.11212758
CHF01618(2)CHF01619(1)CHF01620(1)CHF01621(1)6.21815269
CHF01622(2)CHF01623(2)CHF01624(2)CHF01625(1)6.22415771
CHF01626(3)CHF01627(2)CHF01628(2)CHF01629(1)6.33019789
CHF01630(3)CHF01631(2)CHF01632(2)CHF01633(1)6.33620292
CHF01634(4)CHF01635(4)CHF01636(2)6.450249113
CHF01637(4)CHF01638(4)CHF01639(2)6.460257117
6"—150 lb 15 elementsCHF01640(3)CHF01641(1)CHF01642(1)CHF01643(1)6.11513059
CHF01644(3)CHF01645(5)CHF01646(1)CHF01647(1)6.22315671
CHF01648(3)CHF01649(5)CHF01650(3)CHF01651(1)6.23016374
CHF01652(5)CHF01653(5)CHF01654(3)CHF01655(1)6.33820493
CHF01656(5)CHF01657(5)CHF01658(3)CHF01659(5)6.34521196
CHF01660(5)CHF01661(3)CHF01662(5)6.463260118
CHF01663(5)CHF01664(5)CHF01665(5)6.475270122
8"—150 lb 18 elementsCHF01666(3)CHF01667(2)CHF01668(2)CHF01669(1)8.230244111
CHF01670(2)CHF01671(2)CHF01672(1)8.340274124
CHF01673(3)CHF01674(3)CHF01675(2)8.450303137
8"—150 lb 24 elementsCHF01676(4)CHF01677(2)CHF01678(2)CHF01679(1)8.240253115
CHF01680(4)CHF01681(3)CHF01682(2)8.353287130
CHF01683(4)CHF01684(3)CHF01685(2)8.467318144
Ordering Example: CHF01643, 15 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Forced Air & Gases, Caustic Solutions, Degreasing Solutions
Nominal Pipe SizeModel NumberDim Drawing NumberKWApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
10"—150 lb 27 elementsCHF01686(3)CHF01687(3)10.11440200
CHF01688(9)CHF01689(3)10.21.5485220
12"—150 lb 36 elementsCHF01690(3)12.13550250
CHF01691(3)12.24.5595270
14"—150 lb 45 elementsCHF01692(3)14.13675307
CHF01693(5)14.24.5771350
Ordering Examples: CHF01690, 3 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
CHF01499
  • Standard Element Sheath Materials
  • Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
  • Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
  • 316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
  • Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.
Power
Power Density
Sheath Material
Number of Elements
Supply Voltage
Quantity Price each
1-4 $1,309.00
5-9 $1,243.55
10-24 $1,217.37
25-49 $1,165.01
50-99 $1,138.83
100+ $1,112.65

In stock

Lead Time ( If not in Stock): 8 weeks

Product Specs

  • Heated Medium Forced Air & Gases
  • Pipe Size 1 1/4 NPT to 14 in Flange

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2) — Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
2½ NPT 3 elements2.22CHF01100(1)CHF01101(1)3717
2.33CHF01102(1)CHF01101(1)4621
3"—150 lb 3 elements3.22CHF01104(1)CHF01105(1)6228
3.33CHF01106(1)CHF01107(1)7634
(C*) = Number of Branch Circuits per heater
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Forced Air & Gases, Caustic Solutions, Degreasing Solutions
Nominal Pipe SizeModel NumberDim Drawing NumberKWApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
114NPT 2 elementsCHF01498CHF01499(1)1.11136
CHF01500CHF01501(1)1.11.5136
CHF01502CHF01503(1)1.22178
2½NPT 3 elementsCHF01504(1)CHF01505(1)CHF01506(1)CHF01507(1)2.132813
CHF01508(1)CHF01509(1)CHF01510(1)CHF01511(1)2.24.53516
CHF01512(1)CHF01513(1)CHF01514(1)CHF01515(1)2.263717
CHF01516(1)CHF01517(1)CHF01518(1)CHF01519(1)2.37.54520
CHF01520(1)CHF01521(1)CHF01522(1)CHF01523(1)2.394621
3"—150 lb 3 elementsCHF01524(1)CHF01525(1)CHF01526(1)CHF01527(1)3.135324
CHF01528(1)CHF01529(1)CHF01530(1)CHF01531(1)3.24.56128
CHF01532(1)CHF01533(1)CHF01534(1)CHF01535(1)3.266228
CHF01536(1)CHF01537(1)CHF01538(1)CHF01539(1)3.37.57434
CHF01540(1)CHF01541(1)CHF01542(1)CHF01543(1)3.397634
4"—150 lb 6 elementsCHF01544(1)CHF01545(1)CHF01546(1)CHF01547(1)4.167835
CHF01548(1)CHF01549(1)CHF01550(1)CHF01551(1)4.299141
CHF01552(2)CHF01553(1)CHF01554(1)CHF01555(1)4.2129443
CHF01556(2)CHF01557(1)CHF01558(1)CHF01559(1)4.31511753
CHF01560(2)CHF01561(1)CHF01562(1)CHF01563(1)4.31812054
CHF01564(2)CHF01565(2)CHF01566(1)4.42514767
CHF01567(2)CHF01568(2)CHF01569(1)4.43015168
5"—150 lb 6 elementsCHF01570(1)CHF01571(1)CHF01572(1)CHF01573(1)5.1911452
CHF01574(2)CHF01575(1)CHF01576(1)CHF01577(1)5.21212657
CHF01578(2)CHF01579(1)CHF01580(1)CHF01581(1)5.21512858
CHF01582(2)CHF01583(1)CHF01584(1)CHF01585(1)5.31814666
CHF01586(2)CHF01587(2)CHF01588(1)5.42517278
CHF01589(2)CHF01590(2)CHF01591(1)5.53019287
5"—150 lb 9 elementsCHF01592(3)CHF01593(1)CHF01594(1)CHF01595(1)5.11411954
CHF01596(3)CHF01597(1)CHF01598(1)CHF01599(1)5.21813260
CHF01600(3)CHF01601(3)CHF01602(1)CHF01603(1)5.22313561
CHF01604(3)CHF01605(3)CHF01606(3)CHF01607(1)5.32715068
CHF01608(3)CHF01609(3)CHF01610(1)5.43818383
CHF01611(3)CHF01612(3)CHF01613(3)5.54520593
6"—150 lb 12 elementsCHF01614(2)CHF01615(1)CHF01616(1)CHF01617(1)6.11212758
CHF01618(2)CHF01619(1)CHF01620(1)CHF01621(1)6.21815269
CHF01622(2)CHF01623(2)CHF01624(2)CHF01625(1)6.22415771
CHF01626(3)CHF01627(2)CHF01628(2)CHF01629(1)6.33019789
CHF01630(3)CHF01631(2)CHF01632(2)CHF01633(1)6.33620292
CHF01634(4)CHF01635(4)CHF01636(2)6.450249113
CHF01637(4)CHF01638(4)CHF01639(2)6.460257117
6"—150 lb 15 elementsCHF01640(3)CHF01641(1)CHF01642(1)CHF01643(1)6.11513059
CHF01644(3)CHF01645(5)CHF01646(1)CHF01647(1)6.22315671
CHF01648(3)CHF01649(5)CHF01650(3)CHF01651(1)6.23016374
CHF01652(5)CHF01653(5)CHF01654(3)CHF01655(1)6.33820493
CHF01656(5)CHF01657(5)CHF01658(3)CHF01659(5)6.34521196
CHF01660(5)CHF01661(3)CHF01662(5)6.463260118
CHF01663(5)CHF01664(5)CHF01665(5)6.475270122
8"—150 lb 18 elementsCHF01666(3)CHF01667(2)CHF01668(2)CHF01669(1)8.230244111
CHF01670(2)CHF01671(2)CHF01672(1)8.340274124
CHF01673(3)CHF01674(3)CHF01675(2)8.450303137
8"—150 lb 24 elementsCHF01676(4)CHF01677(2)CHF01678(2)CHF01679(1)8.240253115
CHF01680(4)CHF01681(3)CHF01682(2)8.353287130
CHF01683(4)CHF01684(3)CHF01685(2)8.467318144
Ordering Example: CHF01643, 15 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
23 watts/in2 (3.6 watts/cm2)—Typical Applications: Forced Air & Gases, Caustic Solutions, Degreasing Solutions
Nominal Pipe SizeModel NumberDim Drawing NumberKWApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
10"—150 lb 27 elementsCHF01686(3)CHF01687(3)10.11440200
CHF01688(9)CHF01689(3)10.21.5485220
12"—150 lb 36 elementsCHF01690(3)12.13550250
CHF01691(3)12.24.5595270
14"—150 lb 45 elementsCHF01692(3)14.13675307
CHF01693(5)14.24.5771350
Ordering Examples: CHF01690, 3 KW, 480 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)

en-US
en
Save Configuration