text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Circulation Heaters for Deionized Water, Demineralized Water

Item# CHF02009

Circulation Heaters for Deionized Water, Demineralized Water Circulation Heaters for Deionized Water, Demineralized Water
Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion.
Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid.
Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2)—Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elements2.22CHF01100 (1)CHF01101 (1)3717
2.33CHF01102 (1)CHF01101 (1)4621
3"—150 lb 3 elements3.22CHF01104 (1)CHF01105 (1)6228
3.33CHF01106 (1)CHF01107 (1)7634
(C*) = Number of Branch Circuits per heater

60 watts/in2 (9.3 watts/cm2)—Typical Applications: Deionized Water, Demineralized Water
Nominal Pipe SizeModel NumberDim Drawing NumberKWApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
2½ NPT 3 elementsCHF01996 (1)CHF01997 (1)CHF01998 (1)CHF01999 (1)2.162813
CHF02000 (1)CHF02001 (1)CHF02002 (1)CHF02003 (1)2.17.52813
CHF02004 (1)CHF02005 (1)CHF02006 (1)CHF02007 (1)2.192913
CHF02009 (1)CHF02010 (1)CHF02011 (1)2.2123616
CHF02013 (1)CHF02014 (1)CHF02015 (1)2.2153717
CHF02017 (1)CHF02018 (1)CHF02019 (1)2.3183817
4"—150 lb 6 elementsCHF02021 (1)CHF02022 (1)CHF02023 (1)4.1127735
CHF02025 (1)CHF02026 (1)CHF02027 (1)4.1187936
CHF02029 (2)CHF02030 (2)CHF02031 (1)4.2249242
CHF02032 (2)CHF02033 (2)CHF02034 (1)4.2309442
CHF02035 (2)CHF02036 (2)CHF02037 (1)4.33611753
CHF02038 (2)4.35012155
CHF02039 (2)4.46014566
6"—150 lb 12 elementsCHF02040 (3)CHF02041 (2)CHF02042 (2)CHF02043 (1)6.12412657
CHF02044 (3)CHF02045 (2)CHF02046 (2)CHF02047 (1)6.13613059
CHF02048 (4)CHF02049 (3)CHF02050 (2)6.24815369
CHF02051 (4)CHF02052 (3)CHF02053 (2)6.26015771
CHF02054 (4)CHF02055 (2)6.37219689
CHF02056 (4)6.310020593
CHF02057 (4)6.4120246112
6"—150 lb 15 elementsCHF02058 (3)CHF02059 (5)CHF02060 (3)CHF02061 (1)6.13012858
CHF02062 (5)CHF02063 (5)CHF02064 (3)CHF02065 (5)6.14513360
CHF02066 (5)CHF02067 (3)CHF02068 (5)6.26015872
CHF02069 (5)CHF02070 (5)CHF02071 (5)6.27516374
CHF02072 (5)CHF02073 (5)6.39020292
CHF02074 (5)6.312521397
CHF02075 (5)6.4150257117
Ordering Example: CHF02005, 9 KW, 240 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater
CHF02009
  • Standard Element Sheath Materials
  • Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
  • Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
  • 316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
  • Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.
Power
Power Density
Sheath Material
Number of Elements
Supply Voltage
See All Options
Quantity Price each
1-4 $5,070.00
5-9 $4,816.50
10-24 $4,715.10
25-49 $4,512.30
50-99 $4,410.90
100+ $4,309.50

In stock

Lead Time ( If not in Stock): 5 weeks

Product Specs

  • Heated Medium Deionized Water
  • Pipe Size 2 1/2 NPT to 6 in Flange

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion.
Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid.
Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

8 watts/in2 (1.3 watts/cm2)—Typical Applications: Fuel Oils (Bunker C and Number 6)
Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe SizeDimensional Drawing NumberKWModel NumberApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
212 NPT 3 elements2.22CHF01100 (1)CHF01101 (1)3717
2.33CHF01102 (1)CHF01101 (1)4621
3"—150 lb 3 elements3.22CHF01104 (1)CHF01105 (1)6228
3.33CHF01106 (1)CHF01107 (1)7634
(C*) = Number of Branch Circuits per heater

60 watts/in2 (9.3 watts/cm2)—Typical Applications: Deionized Water, Demineralized Water
Nominal Pipe SizeModel NumberDim Drawing NumberKWApprox Weight
120V240V-1Ph (C*)240V-3Ph (C*)480V-1Ph (C*)480V-3Ph (C*)lbkg
2½ NPT 3 elementsCHF01996 (1)CHF01997 (1)CHF01998 (1)CHF01999 (1)2.162813
CHF02000 (1)CHF02001 (1)CHF02002 (1)CHF02003 (1)2.17.52813
CHF02004 (1)CHF02005 (1)CHF02006 (1)CHF02007 (1)2.192913
CHF02009 (1)CHF02010 (1)CHF02011 (1)2.2123616
CHF02013 (1)CHF02014 (1)CHF02015 (1)2.2153717
CHF02017 (1)CHF02018 (1)CHF02019 (1)2.3183817
4"—150 lb 6 elementsCHF02021 (1)CHF02022 (1)CHF02023 (1)4.1127735
CHF02025 (1)CHF02026 (1)CHF02027 (1)4.1187936
CHF02029 (2)CHF02030 (2)CHF02031 (1)4.2249242
CHF02032 (2)CHF02033 (2)CHF02034 (1)4.2309442
CHF02035 (2)CHF02036 (2)CHF02037 (1)4.33611753
CHF02038 (2)4.35012155
CHF02039 (2)4.46014566
6"—150 lb 12 elementsCHF02040 (3)CHF02041 (2)CHF02042 (2)CHF02043 (1)6.12412657
CHF02044 (3)CHF02045 (2)CHF02046 (2)CHF02047 (1)6.13613059
CHF02048 (4)CHF02049 (3)CHF02050 (2)6.24815369
CHF02051 (4)CHF02052 (3)CHF02053 (2)6.26015771
CHF02054 (4)CHF02055 (2)6.37219689
CHF02056 (4)6.310020593
CHF02057 (4)6.4120246112
6"—150 lb 15 elementsCHF02058 (3)CHF02059 (5)CHF02060 (3)CHF02061 (1)6.13012858
CHF02062 (5)CHF02063 (5)CHF02064 (3)CHF02065 (5)6.14513360
CHF02066 (5)CHF02067 (3)CHF02068 (5)6.26015872
CHF02069 (5)CHF02070 (5)CHF02071 (5)6.27516374
CHF02072 (5)CHF02073 (5)6.39020292
CHF02074 (5)6.312521397
CHF02075 (5)6.4150257117
Ordering Example: CHF02005, 9 KW, 240 Vac, 3 phase circulation heater.
(C*) = Number of Branch Circuits per heater

en-US
en
Save Configuration