
Hazardous Area Enclosure Heater 50W, 100W
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-4 | $202.79 |
5-9 | $192.65 |
10-24 | $188.59 |
25-49 | $180.48 |
50-99 | $176.43 |
100+ | $172.37 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Large Convection Surface
- DIN Rail Mountable
- Ready for Use
- Maintenance Free
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Power
Form Factor
Supply Voltage
Minimum Operating Temperature
Maximum Operating Temperature
Housing Material
Product Specs
The CREX020 Series has been discontinued, but superseded by the CREX03 Series.
Compact convection heater of temperature class T3 (200 °C max.) for use in areas with explosion hazard. For the prevention of formation of condensation, temperature fluctuations, and for protection against frost in transmitter housings, switch cabinets, enclosures and measuring equipment.
SPECIFICATIONS
Explosion Protection According to EN: Gases: Ex db IIC T3 Gb -- Dusts: Ex tb IIIC T200°C Db IP66
Conformity Certificate: EPS 16 ATEX 1 109 X -- IECEx EPS 16.0048X -- EAC
Heating Element: High performance cartridge
Heater Body: Aluminium profile, silver anodised
Connection: Silicone cable (halogen-free) 3 x 0.75 mm², length 1 m
Connection PE: 0.75 to 2.5 mm²
Mounting Clip: clip for 35 mm DIN rail, EN 60715 for heating body sizes 80 x 48 mm
Fitting Position: Vertical
Operating/Storage Temperature: -60 to +85 °C (-76 to +185 °F)
Protection Type/Protection Class: IP66 / I (earthed)
Compact convection heater of temperature class T3 (200 °C max.) for use in areas with explosion hazard. For the prevention of formation of condensation, temperature fluctuations, and for protection against frost in transmitter housings, switch cabinets, enclosures and measuring equipment.
SPECIFICATIONS
Explosion Protection According to EN: Gases: Ex db IIC T3 Gb -- Dusts: Ex tb IIIC T200°C Db IP66
Conformity Certificate: EPS 16 ATEX 1 109 X -- IECEx EPS 16.0048X -- EAC
Heating Element: High performance cartridge
Heater Body: Aluminium profile, silver anodised
Connection: Silicone cable (halogen-free) 3 x 0.75 mm², length 1 m
Connection PE: 0.75 to 2.5 mm²
Mounting Clip: clip for 35 mm DIN rail, EN 60715 for heating body sizes 80 x 48 mm
Fitting Position: Vertical
Operating/Storage Temperature: -60 to +85 °C (-76 to +185 °F)
Protection Type/Protection Class: IP66 / I (earthed)
Does this come with the REX011 Hazardous Area Thermostat? I cannot find this item for purchase on the site, and it is mentioned in the pdf.
Thank you for your inquiry. Unfortunately the REX0118 is no longer available for purchase.
Date published: 2019-11-22