Liquid Turbine Flowmeters
Please add to cart to keep it or exit the configuration
- Cost-Effective Solution for Turbine Flow Meter Applications
- Rugged 316 Stainless Steel Construction Offers Long Service Life in Severe Operating Environments
- Available with NPT or BSP Threads
- Accurate and Repeatable Flow Measurement
- Installation in Pipe Sizes from 1/2 to 2"
- NIST Calibration
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
- Calibration Certificate Type Water (5-Point NIST traceable calibration)
- Maximum Operating Pressure 5000 psi (maximum)
- Pipe Internal Diameter Pipe Sizes from 1/2 to 2 in
The FTB-1400 turbine flow meter is designed to meet the demands of the most rigorous flow measurement applications. Originally developed for the secondary oil recovery market, the FTB-1400 is an ideal meter for liquid flow measurement on or off the oilfield. The meter features a 316 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. These materials help the meter to maintain accuracy and mechanical integrity when measuring the corrosive and abrasive fluids found in many industries.
Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity. As each turbine blade passes through the magnetic field generated by the meter's magnetic pick-up, an AC voltage pulse is generated. These pulses provide an output frequency that is proportional to volumetric flow.
Materials of Construction
Body: 316 stainless steel
Rotor: CD4MCU stainless steel
Rotor Support: 316 stainless steel
Rotor Shaft: Tungsten carbide
Turndown Ratio: 10:1
Flow Accuracy: ±1% of reading for 1" and larger meters
±1% of reading over the upper 70% of the measuring range for 1/2" meters Repeatability: ±0.1%
Calibration: Water (5-Point NIST traceable calibration)
Pressure Rating: 5000 psi (maximum)
Turbine Temperature: -101 to 177°C (50 to 350°F); -101 to 232°C (-150 to 450°F) with "–HT" option
End Connections: NPT; BSP optional
CABLE WITH CONNECTOR IS REQUIRED.
|Model No.||Connection||K-factor |
|Range||Lay Length |
|FTB-1411||½ NPT||18,000||2.3 to 11.3||0.6 to 3||20 to 100||76 (3)|
|FTB-1412||½ NPT||13,000||2.8 to 28||0.75 to 7.5||25 to 250||76 (3)|
|FTB-1413||½ NPT||3,300||7.6 to 56.7||2 to 15||68 to 515||76 (3)|
|FTB-1421||1 NPT||18,000||2.3 to 11.3||0.6 to 3||20 to 100||76 (3)|
|FTB-1422||1 NPT||13,000||2.8 to 28||0.75 to 7.5||25 to 250||76 (3)|
|FTB-1423||1 NPT||3,300||7.6 to 56.7||2 to 15||68 to 515||76 (3)|
|FTB-1424||1 NPT||3,100||11.3 to 113||3 to 30||100 to 1000||101 (4)|
|FTB-1425||1 NPT||870||18.9 to 189||5 to 50||170 to 1700||101 (4)|
|FTB-1431||1½ NPT||330||56.8 to 681||15 to 180||515 to 6000||152 (6)|
|FTB-1441||2 NPT||330||56.8 to 681||15 to 180||515 to 6000||152 (6)|