Quick Disconnect Thermistor Probes with 3-prong Connectors
Series 700 Thermistor Probes for Use with Heavy Duty Handle
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-9 | $126.85 |
10-24 | $120.51 |
25-99 | $114.17 |
100-499 | $107.82 |
500-999 | $101.48 |
1000+ | $95.14 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- For Use with Heavy-Duty
- Available in GP General Purpose
- Available in AP Air Probe
- Available in NP Needle Probe
- 12” Std Probe length
- Made with 304 Stainless steel
- Made with high precision 44033 thermistor element, rated up to 100°C (212°F)
THX-700-AP-12 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Sensor Application
Probe Diameter
Sensor Type
Process Temperature Range
Sheath Material
Probe Length
Connector Style
Description
THX-700 probes are designed to work with the heavy duty HDX handle. Each probe has a 3-prong OTP-copper connector termination and precision 44018 linear thermistor element, rated up to 212°F (100°C), which will work with all readout instruments in Sections L and M designed for Series 700 probes.Quick Disconnect
General Purpose Probe For general purpose gas and liquid immersion measurements. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath, 12" (304 mm) long, it will adapt to most process applications.
Penetration Probe Easily pierces soft and semi-frozen material as well as soil and sand. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath, 12" (304 mm) long.
Air Probe For HVAC applications. The 3/16" (4.8 mm) diameter sheath and radiation hood easily fit into duct-work, grilles, and vents. The probe will work with the OMEGA™ HDX handle or can be cpnnected to a 3-prong standard receptical and be permanently mounted with an OMEGALOK™ compression fittings.


