Ceramic Wire Wound Platinum RTD Elements - Class B
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $39.94 |
| 10-24 | $37.94 |
| 25-49 | $37.14 |
| 50-99 | $35.55 |
| 100-199 | $34.75 |
| 200+ | $33.95 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Ceramic Wire Wound Platinum RTD Elements - Class B is rated
out of
5 by
3.
- Platinum RTD Elements
- Single and Dual Element Versions Available
- 50 and 100 Ohms Models
- All Models in Stock for Fast Delivery
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Application
Resistance or Output Type
Temperature Accuracy
Number of Wires
Probe Diameter
Probe Length
Maximum Temperature Measurement
Minimum Temperature Measurement
Product Specs
OMEGA RTD elements can be used for a variety of temperature applications. Models are available for temperature ranges as broad as -200 to 850°C. Dual element RTDs are also available for applications where two different instruments need to monitor the same temperature.
Rated 4 out of
5
by
Javier from
poor packaging
The product was packaged very good and in a secure way for the ship, but the dimension of the boxes were bigger than of necesary . However the PT100 elements were not in the original blister where they could are more protected.
Date published: 2018-05-15
Rated 4 out of
5
by
vbermud from
Bare leads way too short
It would be extremely helpful if the bare leads came longer than 10 mm
Date published: 2020-06-06
Rated 5 out of
5
by
Luz Marina from
Your products hace excelent quality
Im happy with my product and im glad to buy more products from you.
Date published: 2018-10-17
What are the leads of these things made of ? They are very, very soft, and melt when soldered with 60/40 tin lead.
So what is the recommendation to solder, if they melt at soldering temperatures ? I suspect that they are forming another alloy with the tin-lead, with a melting point below the headline number
Date published: 2020-04-06
