Cryogenic Platinum RTD Temperature Sensor
Cryogenic Sensors and Accessories
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $179.57 |
| 5-9 | $170.59 |
| 10-24 | $167.00 |
| 25-49 | $159.82 |
| 50-99 | $156.23 |
| 100+ | $152.63 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Platinum Resistance Sensors for Cryogenic Measurements
- 4-Wire stainless steel probe
(Band 4 Silicon Diode Sensor) - Special Low Thermal Conductivity
Extension Wire for CY7 Series Diodes - Special Low Thermal Conductivity
Extension Wire for CY7 Series Diodes
PT-102 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Probe Diameter
Probe Length
Application
Resistance or Output Type
Temperature Accuracy
Maximum Temperature Measurement
Minimum Temperature Measurement
Maximum Resistance
Temperature Range
Sensor Type
Size
Style
Output Type
Typical connection for Cryogenic sensors such as the CY7 series. The connection points (A) are made close to the sensor in the case of 4-lead measurement, and near or at the instrumentation for a 2-lead measurement. Generally, the 4-lead connection is preferred.
Accessories for Cryogenic Products
4-lead wire, 32 AWG, 25 ft. with Phosphor bronze wire, Insulation is polyimide on 32 AWG wire and formvar (vinyl acetal) on 36 AWG wire. Both types of insulation are rated down to 1.4K
$283.83
0 In Stock
4-lead wire, 36 AWG, 25 ft. with Phosphor bronze wire, Insulation is polyimide on 32 AWG wire and formvar (vinyl acetal) on 36 AWG wire. Both types of insulation are rated down to 1.4K
$200.34
0 In Stock