The PX409 High-Speed USBH Series connects directly
to your computer. Free software makes data logging and charting your readings a simple task. Also included are .NET drivers and a command set for command line access. The micro-machined silicon design is ideal for pressure or level applications in laboratory, test platforms, or bio/pharmaceutical applications as well as industrial applications that require a rugged, high accuracy transducer. This sensor provides a very stable transducer with an exceptional high accuracy of ±0.08% and a broad compensated range of -29 to 85°C (-20 to 185°F). The modular construction allows for fast delivery of most configurations and fittings.
FREE OMEGA™ Downloadable Software!
Free OMEGA PC software takes the data from the transmitter directly to the digital domain, turning your laptop or Windows® tablet into a virtual meter, chart recorder, or data logger. Also included are .NET APIs and a command set for command-line access. Help files are available after installation with the most update to date information.
Charting Window – The addition of a charting window allows you to see your data graphed in real time. The Y axis is configurable to allow simultaneous graphing of multiple engineering units. You can output the image of your data to a png file.
Channels Window - Display data from all of your sensors simultaneously. Each channel has configurable user alarms, three data filters, tare, resettable low/high indication, and sample rates ranging from 30 minutes to 1000Hz.
Logging Window – A new xls filetype output option presents preformatted data for readability. In addition, Live Statistics are displayed, including the sensor information, the start/stop time, the number of samples taken, the current reading, and the High/Low readings. With the logging window, you can capture your data for later analysis.
SPECIFICATIONS Accuracy: 0.08% BSL (linearity, hysteresis and repeatability combined) Resolution: Up to 5.5 significant figures Zero Balance: ±0.5% full scale typical ±1% maximum (±1% typical, ±2% maximum for 2.5 psi and below) Span Setting: ±0.5% full scale typical ±1% maximum (±1% typical, ±2% maximum for 2.5 psi and below). Calibrated in vertical direction with fitting down Temperature Compensation (Over Compensated Range): Span: Range > 5 psi: ±0.5% Range ≤5 psi: ±1.0% Zero: Range > 5 psi: ±0.5% Range ≤ 5 psi: ±1.0% Minimum Isolation:
100 MΩ @ 50 Vdc case to sensor
2 MΩ @ 50 Vdc case to output terminations Pressure Cycles: 1 million, minimum Long Term Stability (1-Year): ±0.1% full scale typical A to D Conversion: 24-bit Shock: 50 g, 11 mS half sine, vertical and horizontal axis Vibration: 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis Bandwidth: DC to 1000 updates per second typical (±3%) Power Consumption: 0.35 W typical CE Compliant: Meets industrial emissions and immunity EN61326 Environmental Protection: IP65 Secondary Containment Gage/Vacuum/Compound Pressure: 10 inH2O to 5 psi: to 1000 psi 15 to 1000 psi: to 3000 psi 1500 to 5000 psi: to 10,000 psi Absolute/Barometric Pressure: 5 to 1000 psi: to 6000 psi 1500 to 5000 psi: to 10,000 psi Overpressure Gage/Vacuum/Compound Pressure 10 inH2O: 10 times span 1 psi: 6 times span 2.5 psi to 1000 psi: 4 times span 1500 psi yo 5000 psi: 7250 psi maximum Absolute/Barometric Pressure: 5 psia: 6 times span 15 psia to 1000 psia: 4 times span 1500 psia to 5000 psia: 7250 psia maximum Wetted Parts: 316L stainless steel Weight: 200 g (7 oz) Operating Temperature Range: -40 to 85°C (-40 to 185°F) Compensated Temperature: Ranges >5 psi: -29 to 85°C (-20 to 185°F) Ranges ≤5 psi: -17 to 85°C (0 to 185°F)
Order By Part Number
† All amounts shown in USD Note: Comes complete with 5-point NIST traceable calibration certificate, downloadable digital readout, logging software, .NET drivers and command set.
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Pressure Range (PSI) select from: -10W for 10"H2O -001 for 0-1 psi -2.5 for 0-2.5 psi -005 for 0-5 psi -015 for 0-15 psi -030 for 0-30 psi -050 for 0-50 psi -075 for 0-75 psi -100 for 0-100 psi -150 for 0-150 psi -250 for 0-250 psi -500 for 0-500 psi -750 for 0-750 psi -1.0K for 0-1000 psi -1.5K for 0-1500 psi -2.5K for 0-2500 psi -3.5K for 0-3500 psi -5.0K for 0-5000 psi
-16 for 16 to 32 inHg (Barometric only) -26 for 26 to 32 inHg (Barometric only) -32 for 0 to 32 inHg (Barometric only)
(2)
Type select from: G for Gage A for Absolute (15 to 5000 psia) CG for Compound Gage (10W to 15 psi only) V for Vacuum (Negitive gage) B for Barometric Pressure DWU for Wet/Wet Unidirectional Differential WDU for Wet/Dry Unidirectional Differential
(3)
Output select from: USBH for High Speed USB
Note: All combinations may not be valid, check spec sheet for valid part numbers.
Rated 5 out of
5 by
Adrian from
One down 999 to go.I rarely write reviews. I bought the PX409-2.5VUSBH a few weeks back for the apparent ease of use of the USB interface. Admittedly, I have had some issues with the sensor from a software standpoint (mostly nagging "why can't it do that" issues) and a mechanical standpoint (can't figure out how I sprung the sensor), but the bottom line is Omega's Ohio team stood by me every step of the way. They helped me fix software issues and when the gage sprung they helped analyze the problem and even offered to replace the unit. The truth is that the website got me to buy the first one but the service will get me to buy the next 1000! Well done team!
Date published: 2017-05-23
Rated 5 out of
5 by
Brad from
Excellent and easy to use!This is the Third Omega USBH pressure transducer that I have purchased for our lab. We now have a 50, 250, and 500 psi units. Basically no training required due to the ease of use with the Omega software.
Date published: 2016-02-18
Rated 5 out of
5 by
Dr MMM from
Easy to use, high precision plug & play!Spent a little time trying to find a pressure transducer that can easily connect inline to NPT and/or luer fitting to measure and log pressure in real-time and this was by far the most cost-effective option with free software to boot!
Date published: 2017-02-27
Rated 5 out of
5 by
Armia from
Great tool . Can you add a slight modification?Dear Omega Engineering team,
We would like to thank you so much for the excellent transducer we have bought from you almost a couple of months ago. The Transducer's accuracy and ability to measure up to 1000 readings per second helps us to achieve what exactly we are looking for.
Thank you,
Armia
Date published: 2016-09-29
Rated 5 out of
5 by
gcrosh42 from
Works great!Excellent capture rate, very robust design, but most importantly it's totally plug-and-play. Super easy to setup and start capturing data.
Date published: 2015-12-04
Rated 5 out of
5 by
Mike99 from
EasyWorks good - accurate. Has a problem exporting directly to excel but can be worked around by exporting to file.
Charting Window – The addition of a charting window allows you to see your data graphed in real time. The Y axis is configurable to allow simultaneous graphing of multiple engineering units. You can output the image of your data to a png file.
