Skip to main content Skip to navigation

Pneumatic Parallel 2-Jaw Grippers, High Force

Pneumatic Parallel 2-Jaw Grippers with High Gripper Force

0.0

(0)

Pneumatic Parallel 2-Jaw Grippers with High Gripper Force

Click and hold to zoom

Data Sheet (PDF)

$815.24

Item# DPG-10M-2

Volume discounts available

Volume Discount Schedule

Quantity	Price each
1-9	$815.24
10-24	$774.48
25-49	$758.17
50-99	$725.56
100-199	$709.26
200+	$692.95

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 12 weeks

+ Add to Project List

Designed for Use in Applications Where Low Precision Positioning and Backlash Are Acceptable
Excellent Choice for Diverter Gates, Escapements and Ejection Stations
Multiple Body Mount Locations with Top and Bottom Mounting Using DIRECTCONNECT Robohand Technology
Rotary Actuators Can Be Mounted and Operated in Any Orientation

View Specs

DPG-10M-2 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Jaw Opening

Spring Configuration

Grip Force

Specs

Edit Model Options

DPG Series Pneumatic Gripper is a parallel 2-jaw gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws can be mounted on the bottom or side and are supported throughout the length of the body to make this gripper an extremely robust, yet compact, design. They are also available with optional spring assist ("-C" option) on the close stroke to prevent the part from being dropped in case there is a loss of air pressure. They are available in stroke lengths from 6.4 to 25.4 mm (0.25" to 1.00") with a gripper force of 222 N (50 lbs). The DPG pneumatic gripper shielded design allows this gripper to be used in harsh environments.

The DPG pneumatic gripper is a modular component and can be mounted to DLT Linear slides or DRG Rotary Actuators without additional adaptor plates. They can be mounted on the top or side and have air ports on the top, side and front to support mounting and operation in any direction. Top manifold air ports can be used to help eliminate tubing and fittings at the gripper location. Accessory mounting slots make it easy to add magneto sensors and inductive sensor kits are available, the grippers have built in slots for inductive sensor targets.

Pneumatic linear motion automation components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.

All Models