Call us at 1-888-826-6342
Back To Top
Load More Items from this family (70) ...
DIN Rail Signal Conditioners
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Added to Your Shopping Cart
The DRSL-DISPLAY Programmer is required to program DRST-AC, DRST-DC, DRST-UN, DRST-UR, DRSL-U devices. Snaps onto the front panel with transferable configurations.
| Product Number | Input Type | Input Ranges |
|---|---|---|
|
|
Not Applicable
|
Not Applicable
|
The DMD4059 Series converts wheatstone strain bridge sensors, pressure transducers, or load cell signals into process current or voltage. Offered with AC or DC Power.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
0 to 400 mV dc
|
mA, V
|
Process
|
DC
|
1200 V
|
Trim Pot/Switch
|
Adjustable Excitation
|
|
|
mV
|
Bridge, strain, mV
|
0 to 400 mV dc
|
mA, V
|
Process
|
AC
|
1200 V
|
Trim Pot/Switch
|
Adjustable Excitation
|
The TXDIN70 series provide two channel transmitters or isolators with 4-20 or 0-20 mA output. Programmable input types with TXDIN70-DISPLAY accessory (sold separately)
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, mV
|
Temperature
|
See Detail Specs
|
mA
|
Process
|
DC
|
2300 V
|
Display Programmer
|
|
|
TC, RTD, mV
|
Temperature
|
See Detail Specs
|
mA
|
Process
|
AC
|
2300 V
|
Display Programmer
|
The DRSL-LPI Series Conditioners are 1 or 2 channel analog input loop powered isolators. 1:1 signal ratio, low input voltage drop, slim housing.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
0 to 20 mA
|
mA
|
Process
|
Loop
|
300 V
|
Switch
|
2-Channel
|
|
|
mA
|
Process
|
0 to 20 mA
|
mA
|
Process
|
Loop
|
300 V
|
Switch
|
1-Channel
|
The DRSL-RTD-LP is a 2, 3, or 4-wire PT100 RTD input conditioner. Output loop powered with high accuracy and slim housing. Pre-calibrated temp range DIP switch selected.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
-200 to 850°C
|
mA
|
Process
|
Loop
|
None
|
Switch
|
The DRSL-RTD is either isolated or non-isolated with 2, 3, or 4-wire Pt100 RTD input. Pre-calibrated temp ranges selectable via DIP switch. Slim housing, high accuracy.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
-200 to 850°C
|
mA, V
|
Process
|
DC
|
300 V
|
Switch
|
|
|
RTD
|
Temperature
|
-200 to 850°C
|
mA, V
|
Process
|
DC
|
None
|
Switch
|
TXDIN101 has thermocouple, RTD, and mV input with 4-20mA output. LED display, configuration TX69-CABLE sold separately required to program via PC.
| Product Number | Input Type | Input Ranges | Output Type | Display Type |
|---|---|---|---|---|
|
|
Universal (TC, RTD, mV)
|
See Detail Specs
|
mA
|
LED
|
The DRST-DC measures unipolar or bipolar DC current and voltage signals. Passive/active current buffered output voltage. Additional programmer required.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
±100 mA, ±300 Vdc
|
mA, V
|
Process
|
Programmer
|
AC/DC
|
2300 V
|
Display Programmer
|
The LCKD series are Omega's smallest load cells. They are temperature compensated, with ±0.25% linearity and 2mv/V output in capacities from 2.2 lbf to 1,000 lbf.
| Product Number | Input Type | Input Ranges | Output Type | Display Type | Supply Voltage Type | Isolation | Programmability | Additional Feature | FM Approved |
|---|---|---|---|---|---|---|---|---|---|
|
|
AC or DC Voltage, Current, or Frequency
|
50 mVAC up to 600 VAC
|
mA, V
|
Front Panel
|
18 to 256V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
|
|
Strain/Bridge
|
0/5 mV up to 0/80mV
|
mA, V
|
Front Panel
|
18 to 256V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
|
|
TC, RTD, Resistance, Pot, mA, V, NTC
|
See Detail Specs
|
mA, V
|
Front Panel
|
18 to 256V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
The DRSL-TEMP is an output loop powered temperature signal conditioner. Accepts Type J, Type K, or 2, 3 or 4 wire Pt100 RTD input. Slim housing, high accuracy.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD
|
Temperature
|
J -100 to 1200°C, K -180 to 1372°C, Pt 100 RTD -200 to 850°C
|
mA
|
Process
|
DC
|
300 V
|
Switch
|
The DRSL-DC4 Signal Conditioners convert bipolar process voltage and current signals to unipolar signals. DIP switch selectable range, slim housing, high accuracy (0.05%).
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
±20 mA, ±10Vdc
|
mA, V
|
Process
|
DC
|
300 V
|
Switch
|
0.05% Accuracy of Span
|
The DRSP-I Series are DC current splitters that take one 4-20mA input to two 4-20mA outputs w/ AC or DC power. Zero and span adjustments for each output, status LEDs.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
mA (x2)
|
Splitter
|
DC
|
1200 V
|
Trim Pot
|
|
|
mA
|
Process
|
4 to 20 mA
|
mA (x2)
|
Splitter
|
AC
|
1200 V
|
Trim Pot
|
| Product Number | Input Type | Input Ranges | Output Type | Display Type | Supply Voltage Type | Isolation | Programability | FM Approved | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, Resistance, Pot, mA, V, NTC
|
See Detail Specs
|
mA, V
|
None
|
AC/DC
|
2300 V
|
Pushbutton
|
No
|
Universal
|
The DRSL-SP1 is a repeater/splitter that isolates and converts 1 current input to 2 current outputs. Slim housing, high accuracy (0.05%), no setup needed.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
0 to 20 mA
|
mA (x2)
|
Splitter
|
DC
|
300 V
|
None
|
Repeater/Splitter
|
CCT DIN rail conditioners that accept various input signals, such as voltage and current, frequency, temperature (TC and RTD), and provide 0/4 to 20 mA, or 0 to 10 Vdc.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 50 mA dc, 18 Vdc max
|
mA, V
|
Process
|
Loop
|
2000 V
|
Trim Pot/Jumpers
|
Not Applicable
|
|
|
DC Current
|
0 to 5 mA, 0 to 50 mA
|
mA, V
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
|||
|
|
V
|
0 to 0.1 Vdc, 0 to 1 Vdc, 0 to 10 Vdc, 0 to 100 Vdc, 0 to 650 Vdc
|
mA, V
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
|||
|
|
V
|
Process
|
0 to 1 Vdc
|
mA, V
|
Process
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
Not Applicable
|
|
|
V
|
Process
|
0 to 2 Vdc
|
mA, V
|
Process
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
Not Applicable
|
The DRSL-TC Series are isolated or non-isolated thermocouple input signal conditioners. Accepts Type J and Type K TC's. DIP switch selectable ranges, slim housing.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
TC
|
Temperature
|
J -100 to 1200°C, K -180 to 1372°C
|
mA, V
|
Process
|
DC
|
300 V
|
Switch
|
Isolated
|
|
|
TC
|
Temperature
|
J -100 to 1200°C, K -180 to 1372°C
|
mA, V
|
Process
|
DC
|
None
|
Switch
|
Non-Isolated
|
The DRF-LC Series Conditioners are load cell input with 0-10V or 4-20mA output. For load cells with 1, 2, or 3 mV/V output. Full scale at 10, 20, or 30mV. Pre-tare jumpers
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
0 to 10 mV dc
|
V
|
Process
|
DC
|
3500 V
|
Trim Pot
|
|
|
mV
|
Bridge, strain, mV
|
0 to 20 mV dc
|
V
|
Process
|
DC
|
3500 V
|
Trim Pot
|
|
|
mV
|
Bridge, strain, mV
|
0 to 30 mV dc
|
V
|
Process
|
DC
|
3500 V
|
Trim Pot
|
The DRSL-SP2 is a repeater/splitter that isolates and converts 1 process input to 2 process outputs. DIP switch selectable ranges. Slim housing, high accuracy (0.05%)
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 20 mA, 0 to 10 Vdc
|
mA, V (x2)
|
Splitter
|
DC
|
300 V
|
Switch
|
Splitter
|
The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.
| Product Number | Number of Inputs | Input Type | Number of Output | Output Type | Form Factor | Accuracy Rating |
|---|---|---|---|---|---|---|
|
|
1
|
DC Voltage and Current (bipolar)
|
1
|
0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA, 4 to 20 mA, +-5V, +-10 V
|
Din Rail
|
Good
|
The DIN Rail DMD4380 Series converts, amplifies, filters and optically isolates mA or V input signals to process current or voltage outputs. Loop powered w/ 1200V isolation.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 50 Vdc, 0 to 50 mA dc
|
mA, V
|
Process
|
AC
|
1200 V
|
Trim Pot/Switch
|
|
|
mA, V
|
Process
|
0 to 50 Vdc, 0 to 50 mA dc
|
mA, V
|
Process
|
DC
|
1200 V
|
Trim Pot/Switch
|
Related Products
DIN Rail Signal Conditioners
DIN Rail Signal Conditioners are essential for accurate data recording in a wide range of indus...
[+]