Incoloy or SS Drum Immersion Heater Thermostat Over the Side
Tank Immersion Heaters Over-the-Side Immersion Heaters
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $1,125.00 |
| 5-9 | $1,068.75 |
| 10-24 | $1,046.25 |
| 25-49 | $1,001.25 |
| 50-99 | $978.75 |
| 100+ | $956.25 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Incoloy® 800 Steath Heating Element
- Thermowell Standard
- Lightweight and Portable
- Easy Installation and Removal
- NEMA 4 Electrical Enclosure
- Single- or Three-Phase Wiring
TAT10004 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Heating Element Length
Riser Length
Power
Power Density
Supply Voltage
Heated Medium
Features
Form Factor
Supply Voltage Type
Sheath Material
Enclosure Type
Application
OMEGA™ Over-the-Side Immersion heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round or L shaped heater. Standard sheath materials are Incoloy® 800 and steel with all wetted parts made with compatible alloys.
Construction
Tubular heating elements are welded into a liquid-tight junction box. Power leads for the elements travel up through the riser pipe and are connected to a terminal block in a NEMA 4 housing. Unless otherwise specified, heaters are wired for three-phase from the factory but can easily be converted to single-phase.
A thermowell for a 9.5 mm (3/8") diameter bulb is standard to accommodate an optional thermostat. A thermostat can be field installed to mounting lugs located in the electrical enclosure. 102 mm (4") sludge legs keep the elements off the bottom of the tank and above any deposits that may accumulate there.
OMEGA™ Over-the-Side Immersion heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round or L shaped heater. Standard sheath materials are Incoloy® 800 and steel with all wetted parts made with compatible alloys.
Construction
Tubular heating elements are welded into a liquid-tight junction box. Power leads for the elements travel up through the riser pipe and are connected to a terminal block in a NEMA 4 housing. Unless otherwise specified, heaters are wired for three-phase from the factory but can easily be converted to single-phase.
A thermowell for a 9.5 mm (3/8") diameter bulb is standard to accommodate an optional thermostat. A thermostat can be field installed to mounting lugs located in the electrical enclosure. 102 mm (4") sludge legs keep the elements off the bottom of the tank and above any deposits that may accumulate there.
| Model No. | Element Shape | A | B | KW | Approximate Net Weight | ||||
|---|---|---|---|---|---|---|---|---|---|
| 240V-3Ph | 480V-3Ph | mm | inch | mm | inch | kg | lb | ||
| TAT20001 | TAT20002 | Round | 999 | 395⁄16 | 343 | 131⁄2 | 3 | 8 | 17 |
| TAT20003 | TAT20004 | 1303 | 515⁄16 | 470 | 181⁄2 | 6 | 9 | 20 | |
| TAT20005 | TAT20006 | 1303 | 515⁄16 | 597 | 231⁄2 | 9 | 10 | 22 | |
| TAT10001 | TAT10002 | Straight | 999 | 395⁄16 | 575 | 225⁄8 | 3 | 7 | 15 |
| TAT10003 | TAT10004 | 1303 | 515⁄16 | 956 | 375⁄8 | 6 | 8 | 18 | |
| TAT10005 | TAT10006 | 1303 | 515⁄16 | 1337 | 525⁄8 | 9 | 9 | 20 | |
| Ordering Example: TAT20001, 3 KW immersion heater, 240V-3 phase. | |||||||||
| Model No. | Element Shape | A | B | KW | Approximate Net Weight | ||||
|---|---|---|---|---|---|---|---|---|---|
| 240V-3Ph | 480V-3Ph | mm | inch | mm | inch | kg | lb | ||
| TAT20007 | TAT20008 | Round | 999 | 395⁄16 | 343 | 131⁄2 | 3 | 8 | 17 |
| TAT20009 | TAT20010 | 1303 | 515⁄16 | 470 | 181⁄2 | 6 | 9 | 20 | |
| TAT20011 | TAT20012 | 1303 | 515⁄16 | 597 | 231⁄2 | 9 | 10 | 22 | |
| TAT10007 | TAT10008 | Straight | 999 | 395⁄16 | 575 | 225⁄8 | 3 | 7 | 15 |
| TAT10009 | TAT10010 | 1303 | 515⁄16 | 956 | 375⁄8 | 6 | 8 | 18 | |
| TAT10011 | TAT10012 | 1303 | 515⁄16 | 1337 | 525⁄8 | 9 | 9 | 20 | |
| Ordering Example: TAT20007, 3 KW immersion heater, 240V-3 phase. | |||||||||
| Model No. | Element Shape | A | B | KW | Approximate Net Weight | ||||
|---|---|---|---|---|---|---|---|---|---|
| 240V-3Ph | 480V-3Ph | mm | inch | mm | inch | kg | lb | ||
| TAT20013 | TAT20014 | Round | 999 | 395⁄16 | 273 | 103⁄4 | 3 | 7 | 16 |
| TAT20015 | TAT20016 | 999 | 395⁄16 | 343 | 131⁄2 | 6 | 8 | 17 | |
| TAT20017 | TAT20018 | 999 | 395⁄16 | 406 | 16 | 9 | 8 | 18 | |
| TAT20019 | TAT20020 | 1303 | 515⁄16 | 470 | 181⁄2 | 12 | 9 | 20 | |
| TAT20021 | TAT20022 | 1303 | 515⁄16 | 540 | 211⁄2 | 15 | 10 | 21 | |
| TAT20023 | TAT20024 | 1303 | 515⁄16 | 597 | 231⁄2 | 18 | 10 | 22 | |
| TAT10013 | TAT10014 | Straight | 999 | 395⁄16 | 371 | 145⁄8 | 3 | 6 | 14 |
| TAT10015 | TAT10016 | 999 | 395⁄16 | 575 | 225⁄8 | 6 | 7 | 15 | |
| TAT10017 | TAT10018 | 999 | 395⁄16 | 765 | 301⁄8 | 9 | 7 | 16 | |
| TAT10019 | TAT10020 | 1303 | 515⁄16 | 956 | 375⁄8 | 12 | 8 | 18 | |
| TAT10021 | TAT10022 | 1303 | 515⁄16 | 1146 | 451⁄8 | 15 | 9 | 19 | |
| TAT10023 | TAT10024 | 1303 | 515⁄16 | 1337 | 525⁄8 | 18 | 9 | 20 | |
| Ordering Example: TAT20014, 3 KW immersion heater, 480V-3 phase. | |||||||||
