text.skipToContent text.skipToNavigation

Loop Powered Ultrasonic Level Transmitter

Non-Contact Loop Powered Ultrasonic Level Transmitter

4.5

(4)

Non-Contact Loop Powered Ultrasonic Level Transmitter

Click and hold to zoom

Data Sheet (PDF)

$884.48

Item# LVU809

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 7 Days

+ Add to Project List

Simple, Fast Setup with Pushbutton Calibration and LCD Display
Four Measurement Ranges Available up to 10 m (32')
6-segment LCD Display Indicates Air Gap or Liquid Level (Inch or Centimeter Units)
5 cm (2") Minimum Beam Width for Applications with Restricted Space
NEMA 4X (IP65) Enclosure with Rugged PVDF Transducer
Fail-Safe Intelligence with Diagnostic Feedback for Easy Troubleshooting

View Specs

LVU809 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Max Measurement Range

Process Connection Type

Process Connection Size

Category

Media Type

Accuracy

Tank/Vessel Type

Max Operating Pressure

Max Process Temperature

Wetted Materials

Output Signal

Supply Power

Features

Specs

Edit Model Options

Accuracy Value ±0.2% of span
Display type LCD
Maximum Ambient Temperature 60°C (140°F)
Maximum Operating Pressure 30 psi (2 bar) @ 25°C
Measurement Type Level
Minimum Ambient Temperature -20°C (-4°F)
Number of Display Digits 6
Power Source 500 O @ 24 Vdc
Supply voltage 12 to 28 Vdc

The LVU800 Series general purpose 2-wire ultrasonic transmitter provides non-contact level measurement up to 10 m (32'), and is ideally suited for challenging ultrapure, corrosive or waste liquids. Pushbutton calibrated, the transmitter is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include wastewater and sodium hydroxide.

SPECIFICATIONS
Range:
    LVU809: 10 cm to 3 m (4" to 9.8')
    LVU816: 20 cm to 5.5 m(8" to 18')
    LVU826: 20 cm to 8 m(8" to 26.2')
    LVU832: 30 cm to 10 m(12" to 32.8')
Accuracy: ±0.2% of span
Resolution:
    LVU809: 0.5 mm (0.019")
    LVU816/826: 1 mm (0.039")
    LVU832: 2 mm (0.078")
Beam Width:
    LVU809: 5 cm (2") dia.
    LVU816/LVU826/LVU832: 7.6 cm (3") dia.
Deadband:
    LVU809: 10 cm (4")
    LVU816: 20 cm (8")
    LVU826: 20 cm (8")
    LVU832: 30 cm (12")
Display Type: LCD, 6-digit
Display Units: Inch, cm or percent
Display Mode: Air gap or liquid height
Memory: Non-volatile
Supply Voltage: 12 to 28 Vdc
Loop Resistance: 500 O @ 24 Vdc
Signal Output: 4 to 20 mA, 2-wire
Signal Invert: 4 to 20 mA or 20 to 4 mA
Calibration: Push button
Fail-Safety: Selectable 4 mA, 20 mA, 21 mA, 22 mA or hold
Process Temperature: -20 to 60°C (-7 to 140°F)
Temperature Compensation: Automatic
Electronics Temperature:n -40 to 71°C (-40 to 160°F)
Pressure: 30 psi (2 bar) @ 25°C, derated @ 1.667 psi (0.113 bar) per above 25°C
Enclosure Rating: NEMA 4X (IP65)
Enclosure Vent: Watertight membrane
Enclosure Material: PC/ABS FR
Transducer Material: PVDF
Process Mount:
    LVU809: 1 NPT or 1"G
    LVU816/LVU826/LVU832: 2 NPT or 2" G
Mounting Gasket: FKM
Conduit Entrance: Dual, 1/2 NPT
Classification: General purpose CE compliance EN 61326 EMC

All Models

In Stock

Reviews

Rated 4 out of 5 by Ronald Smith from Great little unit Small footprint, easy to program, accurate, dependable

Date published: 2016-10-06

Rated 5 out of 5 by Mike K from Great Level Transmitter Excellent instrument for a modest cost. Easy to setup Good repeatability.

Date published: 2021-09-29

Rated 4 out of 5 by wolfebrand from Simple, dependable level transmitter We have been using these Omega Level sensors for more than 10 years now. I like them because they are simple to use and install, work well for our application, they tend to be pretty dependable as well as accurate, to within about 1/4" the best I can tell. We use them to monitor liquid chlorine bleach (Sodium Hypochlorite) in a 1,100 and 2,000 gallon plastic tanks.

Date published: 2021-02-01

Rated 5 out of 5 by Anonymous from V-notch weir measurement We use this to measure the depth of water for a v-notch weir on a Fluid Metering experiment in Chemical Engineering. The V-notch weir is an ancient way of measuring water and is taught to show the evolution of water measurement. The original one I bought from Omega had a loose wire from 8 years of use and the measurements made no sense. I bought this model again as it works great for our needs.

Date published: 2020-09-23