text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Your card information was not accepted. Please contact the issuing bank for details.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please verify there are no missing or invalid fields.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Portable Dry Block Calibrator

Item# CL-355A

Portable Dry Block Calibrator Portable Dry Block Calibrator
The CL-355A is a small, lightweight, portable dry block calibrator, that offers fast heat-up and cooldown times with excellent performance specifications at a wide operating temperature range. It’s a good choice for standard bench lab work or as a portable field unit. The unit covers the temperature range from 5°C (9ºF) above ambient up to 400°C (752ºF) using a large multi-well machined aluminum insert block as the heat transfer medium to the sensors under test. The CL-355A uses the same aluminum inserts as the CL-740A calibrator. This calibrator is designed to work safely under the following conditions: ambient temperature range: 5 to 40°C (9 to 104°F), up to 95% relative humidity, non-condensing.
CL-355A
  • 10 Insert Formats Available
  • One Multi-Well Insert Included (1/8, 3/16, 1/4, 5/16, 3/8")
  • Maximum Operating Temperature of 400°C (752°F)
  • Independent Over- Temperature Cutout
  • Temperature Sensor Burnout Protection
  • NIST-Traceable Calibration Certificate
  • Shoulder Carrying Strap, Mains Cable and Insert Removal Tool
Maximum Temperature Measurement
Supply Voltage
Power Source
Accuracy Value
Measurement Type
Batteries Included
Form Factor
 This item is available for quick shipping
See All Options
Quantity Price each
1-4 $2,693.00
5-9 $2,558.35
10-24 $2,504.49
25-49 $2,396.77
50-99 $2,342.91
100+ $2,289.05

In stock

Lead Time ( If not in Stock): 4 weeks

Product Specs

  • Maximum Ambient Temperature 400°C (752°F)
  • Minimum Temperature Measurement 5°C (9°F) above ambient
  • Measurement Units °C or °F

The CL-355A is a small, lightweight, portable dry block calibrator, that offers fast heat-up and cooldown times with excellent performance specifications at a wide operating temperature range. It’s a good choice for standard bench lab work or as a portable field unit. The unit covers the temperature range from 5°C (9ºF) above ambient up to 400°C (752ºF) using a large multi-well machined aluminum insert block as the heat transfer medium to the sensors under test. The CL-355A uses the same aluminum inserts as the CL-740A calibrator. This calibrator is designed to work safely under the following conditions: ambient temperature range: 5 to 40°C (9 to 104°F), up to 95% relative humidity, non-condensing.

  • CE Icon CE

en-US
en
Save Configuration